SERIFLEX for indoor and housing interior installation
SERIFLEX cables are designed for indoor and housing interior installation and guarantee protection rating IP50 under standard IEC 60529. They also meet the RoHS 2002/95 guideline.
A coaxial jumper cable assembly SX 141-50-FEP 4.3-10 male screw SMA male 2 m is manufactured with an outer conductor made of lead-free tin-plated copper mesh. This selection of materials allows you to permanently bend the cable as desired with the cable retaining its shape and its RF properties.
Outstanding IM characteristics with maximum passive intermodulation
A SPINNER coaxial jumper cable assembly SX 141-50-FEP 4.3-10 male screw SMA male 2 m guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -150 dBc (typ.) and low VSWR values over the entire frequency range and during the entire operating time of the cable. The robust construction defies even harsh outdoor conditions and for a temperature range from -55 to +85 °C. SPINNER coaxial cable assemblies comply with the RoHS 2002/95 Directive. The length of the cable is 2.0 m. The rugged coaxial cable has inner conductors made of copper, a PE dielectric insulation and a copper outer conductor. Inner and outer conductors are soldered 360° inductively. The degree of protection IP68 according to IEC 60529 is guaranteed.
On one end there is a 4.3-10 male screw connector pre-assembled, on the other end there is a SMA male connector. Thus, you can use the cable as an adapter for the transition between 4.3-10 and SMA connector systems.
The 4.3-10 connector system was designed to meet the latest requirements in mobile communication in terms of size, robustness, performance, and other parameters. Its small footprint supports the use of smaller components, mitigates risks if equipment is assembled without due care, and delivers outstanding electrical performance.
The term SMA stands for Sub-Miniature-A. SAM connectors are quite small, but mechanically very robust due to the screwed swivel nut.
The screw connection, especially when mounted with a suitable torque wrench, provides the strongest hold and a constantly secure fit of the cable. In addition, the center slots in the contacts provide high contact pressure between the cable and the connector for optimum conductivity and signal strength.