1. Home/
  2. Contactless data and power rotary joint 2x 100BASE-TX real-time full-duplex (multiplexed) 24 V DC
Contactless data and power rotary joint 2x 100BASE-TX real-time full-duplex (multiplexed) 24 V DC product photo Front View L
For a larger view click on the picture.

Contactless data and power rotary joint 2x 100BASE-TX real-time full-duplex (multiplexed) 24 V DC

636684C0005
Not available This product is discontinued.

Ethernet 100BASE characteristics

Number of 100BASE-TX Ethernet-Channels:
2 (switched)
Ethernet channel:
100BASE-TX, IRT Ethernet-Channel | One common contactless coupler for two channels, multiplexed
Supported Ethernet Standards:
100BASE-TX (IEEE802.3 Clause 25), full duplex
PROFINET Class:
Class A, Class B, Class C (IRT)
Ethernet Frame Loss Ratio According to RFC2544:
≤ 1 x 10⁻⁹ ET2) ET3)

Contactless DC-power transmission characteristics

Number of DC-channels:
1
External power supply:
Power Supply has to be a SELV type according to IEC60950-1
The current must be externally limited to 5 A
Interface type DC-Input:
2 single wires at stationary part, AWG18 (cable length: 550mm ± 50mm)
Interface type DC-Output:
2 single wires at rotating part, AWG18 | Cable length: 550mm ± 50mm
Input voltage:
21.6 V to 28.8 V DC; 0 V is connected to Case Ground internally
Current consumption, typ./max.:
0.33 A / 0.5 A @ 24 V Supply Voltage (per data channel, without external load)
Output voltage:
24 V DC ±3% (potential free against Case Ground and data channels)
Output current, continuous:
2.5 A (to external load) | Over full temperature range
Output voltage Ripple, max.:
80 mV
Efficiency, typ.:
85% @ full load (at external load)

Mechanical characteristics

Rotating speed, max.:
1,000.0 rpm
Lifetime:
200 x 10⁶ revolutions
Maintenance period:
not required
MTBF:
300000 h
Interface loads, max.:
no loads allowed
Colour:
RAL 9005 jet black
Degree of protection:
IP 64
Degree of protection remark:
connected with appropriate gasket
Weight, approx.:
2.5 kg
Marking:
adhesive label

Environmental conditions

Operating temperature:
-30 to +71 °C
Relative humidity, max.:
95% (condensation not allowed)
Shock:
30 g / 11 ms half sine, 3 shocks in each direction of 3 orthogonal axes
Vibration:
20-50 Hz, PSD of 0.02 g²/Hz falling to 0.001 g²/Hz at 500 Hz in each of 3 orthogonal axes, duration: 15 min/axis
Compliant to MIL-STD-810G
Storage ambient temperature:
-40 to +85 °C
Storage relative humidity, max.:
95% (condensation not allowed)

Further remarks

Remark:
Contactless Data and Power Transmission Channels

This combination of contactless data and power channels offers improved lifetime without the need for maintenance. The contactless design provides a high increase in rotating speed in comparison to slip ring designs.
The data channels are realized by rotating capacitive couplers and the power channel is based on inductive technology.
An integrated auxiliary power channel supplies all rotating electronic devices.
1):
Measured @ 1 Gbit/s with 64 byte frames at 99% channel utilization and 800 s measurement time (for 1000BASE-T)
2):
Measured @ 100 Mbit/s with 64 byte frames at 99% channel utilization and 8000 s measurement time (for 100BASE-TX)
3):
Corresponds to BER ≤ 1 x 10⁻¹²
Customs tariff number:
85437090

Downloads

636684-DS.pdf

Product data sheet – 636684C0005 – 636684-DS.pdf

Follow-Up