Improve signal quality, avoid damage, optimise performance
Mobile radio installations are at risk from external influences such as overvoltages and induced DC voltages. Protective devices such as surge arresters and DC blocks are used to compensate for these influences. Both components must protect the connected equipment without interfering with normal operation. A DC block is a line component that separates direct current (DC) from high-frequency signals. They are used to prevent direct current from flowing into the signalling path, which could impair the signal quality.
Types with open inner and outer conductor: They are mainly used for preventing undesirable induced voltage, in communication equipment, e.g. radiating cables. Inducted voltages are generated by e.g. high-power lines in underground train systems.
Types with open inner conductor only: They are mainly used for shielding antennas or ground stations from low-frequency signals deliberately fed in for controlling mobile communication antennas or for the power supply of tower mounted amplifiers.
The Coaxial DC-Break 4.3-10 male screw 4.3-10 female IP67 33-4000 MHz 5000-6000 MHz inner/outer conductor separated guarantees excellent, lossless mobile communication quality for use in in-building distributed antenna systems (DAS) or on mobile communication base stations outdoors.
Outstanding RF characteristics, best possible passive intermodulation and VSWR
The Coaxial DC-Break 4.3-10 male screw 4.3-10 female IP67 33-4000 MHz 5000-6000 MHz inner/outer conductor separated enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 2000 W with maximum passive intermodulation (IM3) of -160 dBc. The DC block also impresses with its technical values. The maximum insertion loss is 0.60 dB @ 33 to 80 MHz, 0.25 dB @ 80 to 3800 MHz, 0.60 dB @ 3800 to 4000 MHz, 0.60 dB @ 5000 to 6000 MHz. The blocking of the DC voltage is 3000 V.
The 4.3-10 connector system was designed to meet the latest requirements in mobile communication in terms of size, robustness, performance, and other parameters. Its small footprint supports the use of smaller components, mitigates risks if equipment is assembled without due care, and delivers outstanding electrical performance.
The product offers a transition from interface 4.3-10 male to interface 4.3-10 female. The connectors have a straight direction. The protection class is IP 67.
The screw connection, especially when mounted with a suitable torque wrench, provides the strongest hold and a constantly secure fit of the cable. In addition, the center slots in the contacts provide high contact pressure between the cable and the connector for optimum conductivity and signal strength.
Benefits for your mobile radio network
- Ensure signal integrity: The DC block separates direct current from high-frequency signals, improving signal quality and integrity. This is crucial for reliable communication in mobile networks.
- Protection against damage: By isolating direct current, engineers can ensure that radio frequency circuits are not damaged by unwanted current. This helps to extend the life of the infrastructure.
- Improved performance: A clean radio frequency signal, free from DC, can improve the performance of mobile devices and networks, resulting in better transmission quality and higher network performance.
- Compatibility and reliability: The specific DC block is equipped with [interfaces] commonly used in cellular applications. The robust [Locking] design and [IPProtection] protection class make it robust and reliable, even in demanding outdoor and tunnel environments.
