Coaxial jumper cable assembly SF 1/4"-50-PE N male N male right angle 6.5 m product photo Front View L
For a larger view click on the picture.

Coaxial jumper cable assembly SF 1/4"-50-PE N male N male right angle 6.5 m

JA0295
Compare

SpinnerFlex®TopFit - ideal for signal transmission between base stations and antennas

SpinnerFlex®TopFit pre-fabricated coaxial cables (jumper cable assemblies) are the ideal solution for radio frequency signal transmission between base stations and antennas. They offer top-quality design, materials and manufacturing, ensuring optimal connectivity, easy installation, and fault-free functioning, even under extremely harsh environmental conditions.

A coaxial jumper cable assembly SF 1/4"-50-PE N male N male right angle 6.5 m is a high quality, super flexible corrugated cable of the size SF 1/4". It provides a reliable and stable transmission of radio frequency signals in the frequency range DC to 3800 MHz. The cable is optimally shielded against interference, providing excellent, loss-free mobile communication quality for use in in-building distributed antenna systems (DAS) or in mobile communication base stations. In addition, a prefabricated coaxial jumper cable assembly SF 1/4"-50-PE N male N male right angle 6.5 m is also suitable for a variety of demanding industrial applications or broadcast.

Outstanding IM characteristics with maximum passive intermodulation

A SPINNER coaxial jumper cable assembly SF 1/4"-50-PE N male N male right angle 6.5 m guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -156 dBc and low VSWR values over the entire frequency range and during the entire operating time of the cable. The robust construction defies even harsh outdoor conditions and for a temperature range from -55 to +85 °C. SPINNER coaxial cable assemblies comply with the RoHS 2002/95 Directive. The length of the cable is 6.5 m. The rugged coaxial cable has inner conductors made of copper, a PE dielectric insulation and a copper outer conductor. Inner and outer conductors are soldered 360° inductively. The degree of protection IP68 according to IEC 60529 is guaranteed.

On one end there is a N male connector pre-assembled, on the other end there is a N male right angle connector. Right-angled plugs also allow for installation in tight spaces or special cable feeds. If two right-angled connections are selected, the angle of rotation of the connectors can be determined to each other - 0, 90 or 180 degrees.

The N-coaxial connectors were named after their inventor Paul Neill, who developed this standard for RF connectors in 1942. Often, however, the name also relates to the Navy Connector. Type N connectors can be used at frequencies up to 11 GHz, high-precision types up to 18 GHz. It is typically used in mobile communication applications with demanding mechanical and electrical requirements. SPINNER exclusively manufactures connectors with non-slotted outer conductor contacts and a special sealing profile in the connector head instead of the flat seal disk, specified by IEC or CECC. This ensures the most reliable sealing function.

RF characteristics

Number of interfaces:
2
Interface type:
N male (50 Ω) per IEC 61169-16
N male (50 Ω) per IEC 61169-16
Interface direction:
Port 1: straight
Port 2: right angle
Frequency range:
DC to 3800 MHz
Average power rating:
0.35 kW @ 960 MHz (at 40 °C ambient temperature)
0.22 kW @ 2200 MHz (at 40 °C ambient temperature)
0.19 kW @ 2700 MHz (at 40 °C ambient temperature)
0.16 kW @ 3800 MHz (at 40 °C ambient temperature)
0.12 kW @ 5825 MHz (at 40 °C ambient temperature)
VSWR, max.:
1.08 @ DC to 960 MHz
1.10 @ 960 to 2200 MHz
1.14 @ 2200 to 2700 MHz
1.16 @ 2700 to 3800 MHz 1)
VSWR, typ.:
1.05 @ DC to 960 MHz
1.07 @ 960 to 2200 MHz
1.08 @ 2200 to 2700 MHz
1.12 @ 2700 to 3800 MHz 1)
Insertion loss coefficient /100m:
19.1 dB @ 960 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
30.1 dB @ 2200 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
33.7 dB @ 2700 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
40.4 dB @ 3800 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
53.4 dB @ 5825 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Passive intermodulation (IM3), max.:
-156 dBc
Passive intermod. (IM3), typ.:
-160 dBc

Mechanical characteristics

Cable type:
SF 1/4"-50-PE
Crush resistance:
18.4 N/mm
Clamp spacing:
200 mm
Repeated bending radius, min.:
25 mm
Inner conductor material / surface coating:
Cu-alloy / Ag-plated
Outer conductor material / coating:
Cu-alloy / Ag-plated or CuSnZn-plated
Jacket material:
PE
Insulation material:
PTFE, PE
Sealing material:
Silicone rubber
Colour:
black
Degree of protection:
IP 68
Degree of protection remark:
0.1 bar / 6 hours / unmated
1 bar / 1 hour / mated
RoHS compliance:
compliant to directive 2011/65/EU and amendment (EU) 2015/863
compliant to directive RoHS 2002/95/EC
Length:
6.5 m
Outer jacket diameter, nom.:
7.8 mm
Length Tolerances:
±100 mm

Environmental conditions

Installation temperature range:
-40 to +60 °C
Operating temperature:
-50 to +85 °C
Storage ambient temperature:
-70 to +85 °C

Further remarks

Sales Article Number:
JS14-NMNR-6M5
1):
The given VSWR values are maintained within all global cellular frequency bands.
Customs tariff number:
85442000

Downloads

JA-DS.pdf

Product data sheet – JA0295 – JA-DS.pdf

REACH_Mobile_Communication_10123443-TD.pdf

Technical document – JA0295 – REACH-Certificate for Mobile Communication Products – REACH_Mobile_Communication_10123443-TD.pdf

RoHS_Mobile_Communication_10123425-TD.pdf

Technical document – JA0295 – RoHS-Certificate for Mobile Communication Products – RoHS_Mobile_Communication_10123425-TD.pdf

M30804.pdf

Handling instructions – JA0295 – M30804.pdf