Coaxial load 400 W 380-3800 MHz 7-16 female low PIM

534276
Compare

SPINNER loads offer outstanding electrical and mechanical properties

The modular SPINNER system for loads offers you great flexibility in the selection of your components. It allows you to configure power, frequency range and connectors according to your individual requirements. The advantages are obvious: cost savings through standardization and reliable technical quality.

The Coaxial load 400 W 380-3800 MHz 7-16 female low PIM is placed to the end of the signal path and thus guarantees the correct impedance termination. This reduces disturbing reflections and ensures the maximum performance and quality of the overall system. You can individually combine your attenuator and adapt it to the requirements of your local installation.

When used for in-building installation, a Coaxial load 400 W 380-3800 MHz 7-16 female low PIM allows you to ensure continuous power and power radiation of your antennas within your building.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

The load enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 250 W.

A SPINNER Coaxial load 400 W 380-3800 MHz 7-16 female low PIM guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -160 dBc and low VSWR values over the entire frequency range and during the entire operating time.

The load offers an interface 7-16 female.

SPINNER loads can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitly stated in our product data sheets.

The Coaxial load 400 W 380-3800 MHz 7-16 female low PIM is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.

The protection class is IP 20.

The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.

RF characteristics

Number of interfaces:
1
Interface type:
7-16 female (50 Ω) per IEC 61169-4
Interface direction:
straight
Frequency range:
380 to 4000 MHz
Average power rating:
250 W @ 380 to 694 MHz
400 W @ 694 to 2700 MHz
250 W @ 2700 to 4000 MHz
VSWR, max.:
1.25 @ 380 to 694 MHz
1.15 @ 694 to 4000 MHz
Passive intermodulation (IM3), max.:
-160 dBc @ 380 to 2700 MHz

Mechanical characteristics

Cooling:
convection
IP protection level:
IP 20
IP protection level remark:
mated / 1bar, 1h, ≤18°C
Weight, approx.:
14.5 kg

Environmental conditions

Environmental conditions:
ETSI EN 300019-1-1 Class 1.2
ETSI EN 300019-1-2 Class 2.3
ETSI EN 300019-1-3 Class 3.3
Operating temperature:
-5 to +55 °C

Scope of delivery & accessories

Mounting accessoires:
to be ordered separately under BN B20641

Further remarks

Customs tariff number:
85332900

Downloads

534276-MS.vex

Model – 534276 – iBwave VEX file – 534276-MS.vex

534276-DS.pdf

Product data sheet – 534276 – 534276-DS.pdf