5 kW load DC-960 MHz 90-264 V AC 1 5/8" EIA product photo Front View L
For a larger view click on the picture.

5 kW load DC-960 MHz 90-264 V AC 1 5/8" EIA

534260
Compare

SPINNER loads offer outstanding electrical and mechanical properties

The modular SPINNER system for loads offers you great flexibility in the selection of your components. It allows you to configure power, frequency range and connectors according to your individual requirements. The advantages are obvious: cost savings through standardization and reliable technical quality.

The 5 kW load DC-960 MHz 90-264 V AC 1 5/8" EIA is placed to the end of the signal path and thus guarantees the correct impedance termination. This reduces disturbing reflections and ensures the maximum performance and quality of the overall system. You can individually combine your attenuator and adapt it to the requirements of your local installation.

The 5 kW load DC-960 MHz 90-264 V AC 1 5/8" EIA ensures optimum protection for your highly sensitive signal transmission between transmitter and antenna on broadcast sites.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

The load enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 5 kW.

The load offers an interface 1 5/8" EIA.

SPINNER loads can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitly stated in our product data sheets.

The protection class is IP 20.

Coaxial flange connectors, generally known as “EIA flanges”, are connected by a coupling element. The flange connector system complies with international standards EIA STD RS-225, 339 IEC, DIN EN 122150 and MIL-F 24044. The EIA flange connectors are excellently qualified suited for pressurized systems and for outdoor installations. 1 5/8" EIA connectors are used to link two elements of a rigid or semi-rigid high performance coaxial transmission line for radio frequency signals. Typically, these are operated in systems for very high power transmission (from kW to MW), e.g. in DAB, DVB or FM broadcast systems or in high-energy applications in research facilities (particle accelerator, plasmatron).

RF characteristics

Number of interfaces:
1
Interface type:
1 5/8" EIA (50 Ω) per IEC 60339-2
Interface direction:
straight
Frequency range:
DC to 960 MHz
Average power rating:
5 kW (at 25 °C ambient temperature)
Proof voltage rating:
2.5 kV
VSWR, max.:
1.11 @ DC to 860 MHz
1.25 @ 860 to 960 MHz

Electrical characteristics

Mains voltage:
90 to 264 V AC
Mains AC frequency:
47 to 63 Hz
Power consumption, approx.:
90 W
Operating voltage:
24 V DC
Interlock connection:
two-pole connector with screwlocking according to IEC 60130-9, Co. Binder, series 581/680/682, TYP 09-0303-00-02
Interlock voltage:
≥ 42.4 V ACpk
≥ 30 V DC
Interlock voltage remark:
SELV circuits according to IEC EN 60950-1
Interlock current, max.:
1 A

Mechanical characteristics

Cooling type:
fan
Forced air cooling type:
temperature-controlled
Degree of protection:
IP 20
Weight, approx.:
32.0 kg
Length:
342.0 mm
Width:
148.8 mm
Height:
781.5 mm

Environmental conditions

Operating position:
upright (as shown on the data sheet)
Operational environment:
operating sites with limited access, indoor only
Operating temperature:
-15 to +45 °C
Relative humidity, max.:
95% (condensation not allowed)
Storage ambient temperature:
-30 to +85 °C
Storage relative humidity, max.:
95% (condensation not allowed)

Scope of delivery & accessories

Delivery scope:
power supply unit, interlock cable connector, fastening angle, screw set for fastening angle, product manual

Further remarks

Customs tariff number:
85332900

Downloads

534260-DS.pdf

Product data sheet – 534260 – 534260-DS.pdf

SPINNER_BerylliumOxideCeramics.pdf

Safety data sheet – 534260 – Berylliumoxideceramics – SPINNER_BerylliumOxideCeramics.pdf

M36363.pdf

Product manual – 534260 – M36363.pdf