1. Home/
  2. Contactless data and power rotary joint 1x 100BASE-TX real-time full-duplex 48 V DC 300 W
Contactless data and power rotary joint 1x 100BASE-TX real-time full-duplex 48 V DC 300 W product photo Front View L
For a larger view click on the picture.

Contactless data and power rotary joint 1x 100BASE-TX real-time full-duplex 48 V DC 300 W

637490C0004
Compare

Ethernet 100BASE characteristics

Number of 100BASE-TX Ethernet-Channels:
1
Ethernet channel:
100BASE-TX Ethernet Channel | one signal channel provided
Supported Ethernet Standards:
100BASE-TX (IEEE802.3 Clause 25), autonegotiation (full duplex only)
OSI layer operation:
Layer 1 (physical)
Supported protocols:
Real-time ethernet protocols
Ethernet Frame Loss Ratio According to RFC2544:
≤ 1 x 10⁻⁹
Measured for 8000s with 64 byte frames at 99% channel utilization, corresponds to BER ≤ 1 x 10⁻¹²

Contactless DC-power transmission characteristics

Number of DC-channels:
1
External power supply:
Power supply has to be a ES1 type according to DIN EN 62368-1
The current must be externally limited to 10 A
Interface type DC-Input:
PUR cable, 2x 1,5mm², shielded, flying leads (cable length: 1400 mm 1) )
Interface type DC-Output:
PUR cable, 2x 1,5mm², shielded, flying leads (cable length: 1400 mm 1) )
Input voltage:
48 V DC ± 10%
Inrush current:
6 A (internally limited during power up)
Output voltage:
48 V DC ±5% (potential free against case ground and data channels)
Output current, continuous:
6.6 A (Power derating dependent on case temperature and input voltage)
Average output power:
300.0 W
Output voltage Ripple, max.:
±150 mV
Efficiency, typ.:
85% @ full load (at external load)

Electrical characteristics

Operating connection:
internally wired (for data transmission)

Mechanical characteristics

Standards:
EU Directive EMC Directive 2014/30/EU
DIN EN 55032 (Class B) (Radio disturbance characteristics)
DIN EN 55024 (Immunity characteristics)
Rotating speed, max.:
3,000.0 rpm
Lifetime:
200 x 10⁶ revolutions
MTBF:
300000 h
Interface loads, max.:
no loads allowed
Colour:
RAL 9005 jet black
Degree of protection:
IP 60
Weight, approx.:
6.0 kg
Marking:
adhesive label
Inner diameter:
20.0 mm

Environmental conditions

Operating temperature:
-25 to +60 °C
Relative humidity, max.:
95% (condensation not allowed)
Shock:
30 g / 11 ms half sine, 3 shocks in each direction of 3 orthogonal axes
Vibration:
20-50 Hz, PSD of 0.02 g²/Hz falling to 0.001 g²/Hz at 500 Hz in each of 3 orthogonal axes, duration: 15 min/axis
Storage ambient temperature:
-40 to +85 °C
Storage relative humidity, max.:
95% (condensation not allowed)

Further remarks

Remark:
This combination of contactless data and power channels offers improved lifetime without the need for maintenance. The contactless design allows very high rotational speeds in comparison to slip ring designs.
The data channels are realized by rotating capacitive couplers and the power channel is based on an inductive technology.

POWERLINK
PROFINET
EtherCAT
SERCOS III
EtherNet/IP
VARAN
IEEE-1588 v2 (PTP)
1):
cable length tolerance ±5%
Customs tariff number:
85437090

Downloads

637490-DS.pdf

Product data sheet – 637490C0004 – 637490-DS.pdf