SPINNER adapters offer outstanding electrical and mechanical properties
Adapters are used to connect transmission lines with different interface sizes (so-called inter-type or between-lines adapter) or within one size but different interface genders (so-called within-type or in-line adapter).
SPINNER high frequency adapters are optimized for quality and performance and are designed for the lowest possible reflection factors. The outstanding electrical and mechanical properties, the simple installation and the high reliability make SPINNER high-frequency adapters one of the most efficient and cost-effective transition connectors on the market. Precision adaptors with RF quality grade 0 are available upon request.
The SPINNER N male to RUG-3.5 mm female (50 Ω/75 Ω) DC-20 GHz precision adapter is characterized by and its longevity for test and measurement laboratories. A SPINNER precision adapter increases the lifetime of the connector of the analyzer considerably and thus saves money in the long term.
Outstanding RF characteristics, best possible passive intermodulation and VSWR
A N male to RUG-3.5 mm female (50 Ω/75 Ω) DC-20 GHz precision adapter enables you to reliably transmit radio-frequency signals in the frequency range from DC to 20 GHz.
The adaptor offers a transition from interface N male to interface 3.5 mm female. The connector has a straight direction.
The N-coaxial connectors were named after their inventor Paul Neill, who developed this standard for RF connectors in 1942. Often, however, the name also relates to the Navy Connector. Type N connectors can be used at frequencies up to 11 GHz, high-precision types up to 18 GHz. It is typically used in mobile communication applications with demanding mechanical and electrical requirements. SPINNER exclusively manufactures connectors with non-slotted outer conductor contacts and a special sealing profile in the connector head instead of the flat seal disk, specified by IEC or CECC. This ensures the most reliable sealing function.
3.5 mm coax connectors can be used up to 33 GHz and have low manufacturing tolerances. They are designed for many mating cycles It has an air dielectric interface and closely controlled center conductor support bead providing mechanical interface tolerances similar to hermaphroditic connectors. A 3.5 mm coaxial interface can be mechanically mated with 2.92 mm and SMA connectors, but the connection creates a signal reflection that must be considered.
