1. Home/
  2. 1 channel 100 Mbit/s Profinet IRT contactless coupler
1 channel 100 Mbit/s Profinet IRT contactless coupler product photo Front View L
For a larger view click on the picture.

1 channel 100 Mbit/s Profinet IRT contactless coupler

636699C0004
Not available This product is discontinued.

Ethernet 100BASE characteristics

Number of 100BASE-TX Ethernet-Channels:
1
Ethernet channel:
100BASE-TX Ethernet Channel | One signal channel per contactless transmission channel
Supported Ethernet Standards:
100BASE-TX (IEEE802.3 Clause 25), autonegotiation (full duplex only)
OSI layer operation:
Layer 1 (physical)
Supported protocols:
PROFINET CC-A, CC-B, CC-C (IRT)
POWERLINK
Ethernet Frame Loss Ratio According to RFC2544:
≤ 1 x 10⁻⁹ ET2) ET3)

Contactless DC-power transmission characteristics

Number of DC-channels:
1
External power supply:
Power Supply has to be a SELV type acc. to IEC60950-1
The current must be externally limited to 4 A per transmission channel
Interface type DC-Input:
2 single wires at stator side, AWG22. 2 single wires at rotor side, AWG22
Cable length: see drawing
Input voltage:
21.6 V to 28.8 V DC; 0 V is connected to Case Ground internally
Inrush current:
3 A per transmission channel (duration 2 ms)
Current consumption, typ./max.:
0.33 A / 0.5 A @ 24 V Supply Voltage
Power consumption, typ./max.:
8 W/ 12 W
Applied standards:
DIN EN 55022 Class B | Radio disturbance characteristics
DIN EN 61000-4-2 | ESD immunity
DIN EN 61000-4-3 | RF immunity, radiated
DIN EN 61000-4-4 | Transient / burst immunity
DIN EN 61000-4-6 | RF immunity, conducted
Applicable EU directive:
EMC Directive 2014/30/EU

Mechanical characteristics

Rotating speed, max.:
3,000.0 rpm
Lifetime:
200 x 10⁶ revolutions
Maintenance period:
not required
MTBF:
300000 h
Interface loads, max.:
no loads allowed
Colour:
RAL 9005 jet black
Degree of protection:
IP 64
Degree of protection remark:
connected with appropriate gasket
Weight, approx.:
1.5 kg
Marking:
adhesive label

Environmental conditions

Operating temperature:
-30 to +71 °C
Relative humidity, max.:
95% (condensation not allowed)
Shock:
30 g / 11 ms half sine, 3 shocks in each direction of 3 orthogonal axes
Vibration:
20-50 Hz, PSD of 0.02 g²/Hz falling to 0.001 g²/Hz at 500 Hz in each of 3 orthogonal axes, duration: 15 min/axis
Compliant to MIL-STD-810G
Storage ambient temperature:
-40 to +85 °C
Storage relative humidity, max.:
95% (condensation not allowed)

Further remarks

Remark:
Contactless Data Transmission Channels

The contactless data transmission channels offer improved lifetime and reliability without the need for maintenance. The contactless design guarantees error free data transmission even at very high rotating speeds. The IRT version supports Profinet class C and other real time protocols.
The data transmission channels are realized by rotating capacitive couplers. Two channels can be provided per unit.
1):
Measured @ 1 Gbit/s with 64 byte frames at 99% channel utilization and 800 s measurement time (for 1000BASE-T)
2):
Measured @ 100 Mbit/s with 64 byte frames at 99% channel utilization and 8000 s measurement time (for 100BASE-TX)
3):
Corresponds to BER ≤ 1 x 10⁻¹²

Downloads

636699-DS.pdf

Product data sheet – 636699C0004 – 636699-DS.pdf

Follow-Up