1. Home/
  2. 1 channel fiber optic rotary joint singlemode FC-PC IP40 with contactless power transmission
1 channel fiber optic rotary joint singlemode FC-PC IP40 with contactless power transmission product photo Front View L
For a larger view click on the picture.

1 channel fiber optic rotary joint singlemode FC-PC IP40 with contactless power transmission

549951C0001
Not available This product is discontinued.

RF characteristics

Number of interfaces:
2
Channel count:
1
Interface type:
FC-PC
Channel designation:
1
Interface type remark:
adapter
Fiber type:
E9 / 125 µm
Fiber mode:
Singlemode
Average power rating:
200 mW / 23 dBm
Return loss min.:
30 dB 1) 4)
Return loss:
37 dB 1) 4)
Insertion loss variation due to rotation, max.:
3 dB 2) 3) 4)

Contactless DC-power transmission characteristics

Number of DC-channels:
1
Interface type DC-Input:
B03B-XASK-1
Pin1: 12 VDC
Pin2: 0 VDC
Pin3: NC
Recommended external connector (input):
XAP-03V-1
Interface type DC-Output:
B03B-XASK-1
Pin1: NC
Pin2: 0 VDC
Pin3: 12 VDC
Recommended external connector (output):
XAP-03V-1
Input voltage:
10.8 to 14.4 V DC | Power Supply has to be a SELV type according to IEC60950-1
The current must be externally limited to 5 A
Output voltage:
12 V DC (±3%) 5)
Output current, continuous:
2 A | Over full temperature range
Output voltage Ripple, max.:
80 mV
Efficiency, typ.:
85% @ full load
Applied standards:
DIN EN 55022 | Radio disturbance characteristics (B)
DIN EN 61000-4-2 | ESD immunity
DIN EN 61000-4-3 | RF immunity, radiated
DIN EN 61000-4-4 | Transient / burst immunity
DIN EN 61000-4-6 | RF immunity, conducted
Applicable EU directive:
EMC Directive 2004/108/EC

Mechanical characteristics

Rotating speed, max.:
3,000.0 rpm
Lifetime:
200 x 10⁶ revolutions
Interface loads, max.:
±10 N in axial direction (load on mounting plane on output side)
±50 N in radial direction (load on mounting plane on output side (during rotation))
FO connector material / coating:
copper-alloy
Degree of protection:
IP 40
Weight, approx.:
600.0 g
Marking:
adhesive label (SPINNER logo)
Temperature of cover, max.:
+100 °C

Environmental conditions

Operating temperature:
-20 to +71 °C
Relative humidity, max.:
95% (condensation not allowed)
Operating altitude, max.:
2000 m
Shock:
Typ. 30 g / 11 ms acc. to MIL-STD-810G
Storage ambient temperature:
-40 to +85 °C
Storage relative humidity, max.:
95% (condensation not allowed)

Further remarks

1):
Measurement method according to standard IEC 61300-3-6 method 1
2):
Measurement method according to standard IEC 61300-3-4 insertion method (B)
3):
Based on SFP+ BIDI EOLP-BI1696-12ADL & EOLP-BI1696-12DAL Series from "eoptolink" which offers 12 dB power budget
4):
All connectors have to be cleaned
5):
Output Voltage is compatible to "Emergent" camera HS4000
Customs tariff number:
90138000000

Downloads

549951C0001-DS.pdf

Product data sheet – 549951C0001 – 549951C0001-DS.pdf