10 kW SmartLoad DC-860 MHz 115 V 3 1/8" EIA with wheels product photo Front View L
For a larger view click on the picture.

10 kW SmartLoad DC-860 MHz 115 V 3 1/8" EIA with wheels

546423C0401
Compare

SPINNER loads offer outstanding electrical and mechanical properties

The modular SPINNER system for loads offers you great flexibility in the selection of your components. It allows you to configure power, frequency range and connectors according to your individual requirements. The advantages are obvious: cost savings through standardization and reliable technical quality.

The 10 kW SmartLoad DC-860 MHz 115 V 3 1/8" EIA with wheels is placed to the end of the signal path and thus guarantees the correct impedance termination. This reduces disturbing reflections and ensures the maximum performance and quality of the overall system. You can individually combine your attenuator and adapt it to the requirements of your local installation.

The 10 kW SmartLoad DC-860 MHz 115 V 3 1/8" EIA with wheels ensures optimum protection for your highly sensitive signal transmission between transmitter and antenna on broadcast sites.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

The load enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 10 kW.

The load offers an interface 3 1/8" EIA.

SPINNER loads can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitly stated in our product data sheets.

We use liquid cooling for higher power levels. A mixture is used as the coolant which guarantees frost and corrosion protection. From 10 kW we also offer recooling units and safety devices such as Carrier safety loops or temperature monitoring.

The protection class is IP 20.

Coaxial flange connectors, generally known as “EIA flanges”, are connected by a coupling element. The flange connector system complies with international standards EIA STD RS-225, 339 IEC, DIN EN 122150 and MIL-F 24044. The EIA flange connectors are excellently qualified suited for pressurized systems and for outdoor installations. 3 1/8" EIA connectors are used to link two elements of a rigid or semi-rigid high performance coaxial transmission line for radio frequency signals. Typically, these are operated in systems for very high power transmission (from kW to MW), e.g. in DAB, DVB or FM broadcast systems or in high-energy applications in research facilities (particle accelerator, plasmatron).

RF characteristics

Number of interfaces:
1
Interface type:
3 1/8" EIA (50 Ω) per IEC 60339-2
Interface type remark:
facing upwards
Interface direction:
straight
Frequency range:
DC to 860 MHz
Average power rating:
10 kW
Proof voltage rating:
17 kV
VSWR, max.:
1.04 @ DC to 108 MHz or
1.04 @ 108 to 470 MHz or
1.04 @ 470 to 860 MHz or
1.08 @ DC to 860 MHz

Electrical characteristics

Mains connection:
male power socket, acc. IEC 60320-1 (C20)
Mains voltage:
115 V
Mains voltage tolerance:
± 10 %
Mains AC frequency:
50 to 60 Hz
Mains connection system:
L, N, PE
Mains nominal current, approx.:
5.5 A
Power consumption, approx.:
80 W (standby), 0.8 kW (full operation)
Operating modes:
RF power 0 W to approx. 500 W: cooling with pump and fan @ idle speed 1)
RF power approx. 500 W to 10 kW: pump and fan from idle to full speed 1)
Interlock connection:
two-pole connector with screw locking according to IEC 60130-9, Co. Binder, series 581/680/682, TYP 09-0303-00-02
Interlock voltage:
≥ 42.4 V ACpk
≥ 60 V DC
Interlock voltage remark:
ES1 type per IEC 62368-1
Interlock current, max.:
1 A

Mechanical characteristics

Operating modes:
RF power 0 W to approx. 500 W: cooling with pump and fan @ idle speed 1)
RF power approx. 500 W to 10 kW: pump and fan from idle to full speed 1)
Cooling type:
liquid
Heat exchanger type:
10 kW special SPINNER single ventilator type
Coolant density:
1.054 kg/dm3 @ +20°C
Chemical composition:
mixture of distilled water, 39 Vol. % ethylene glycol and corrosion inhibitor,
ANTIFROGEN N
Degree of protection:
IP 20
Weight, approx.:
85.0 kg

Environmental conditions

Operational environment:
operating sites with limited access, indoor only
Operating temperature:
-10 to +45 °C
Relative humidity, max.:
95% (non-condensing)
Operating altitude, max.:
2286 m
Transport temperature range:
-20 to +70 °C
Transport relative humidity, max.:
95% (non-condensing)
Storage ambient temperature:
-20 to +70 °C
Storage relative humidity, max.:
95% (non-condensing)

Scope of delivery & accessories

Delivery scope:
mains cable connector, interlock cable connector, drain hose, mounting brackets, product manual, material safety data sheet of the coolant

Further remarks

Remark:
Coaxial load with intelligent control:
• standby function
• pump and fan controlled as needed
• super fast self protection
• potential-free interlock contact
• single phase power supply
• side walls can be covered
• swivel castors with double stop
1):
Depending on the ambient temperature and the applied RF power, the speed of the pump and fand varies between idle and full speed.
Customs tariff number:
85332900

Downloads

546423C0400-DS.pdf

Product data sheet – 546423C0401 – 546423C0400-DS.pdf

SPINNER_AntifrogenN.pdf

Safety data sheet – 546423C0401 – SPINNER_AntifrogenN.pdf

SPINNER_AntifrogenN_(2017).pdf

Safety data sheet – 546423C0401 – outdated – SPINNER_AntifrogenN_(2017).pdf