100 W 3 dB attenuator DC-4 GHz N male to N female product photo Front View L
For a larger view click on the picture.

100 W 3 dB attenuator DC-4 GHz N male to N female

620025
Compare

SPINNER attenuators offer outstanding electrical and mechanical properties

The modular SPINNER system for attenuators offers you great flexibility in the selection of your components. It allows you to combine power, attenuation and connectors according to your individual requirements. The advantages are obvious: cost savings through standardisation and reliable technical quality.

The 100 W 3 dB attenuator DC-4 GHz N male to N female is placed into the signal path and reduces the amplitude of the input signal by 3 dB. This reduces the output power and protects the transmitter of your installation from the effects of excessive power. You can individually combine your attenuator and adapt it to the requirements of your local installation.

When used for in-building installation, a 100 W 3 dB attenuator DC-4 GHz N male to N female allows you to ensure continuous power and power radiation of your antennas within your building.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

The attenuator enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 100 W.

The attenuator offers on one side an interface N male and on the other side an interface N female.

SPINNER attenuators can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitely stated in our product data sheets.

The 100 W 3 dB attenuator DC-4 GHz N male to N female is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.

The protection class is IP 50.

The N-coaxial connectors were named after their inventor Paul Neill, who developed this standard for RF connectors in 1942. Often, however, the name also relates to the Navy Connector. Type N connectors can be used at frequencies up to 11 GHz, high-precision types up to 18 GHz. It is typically used in mobile communication applications with demanding mechanical and electrical requirements. SPINNER exclusively manufactures connectors with non-slotted outer conductor contacts and a special sealing profile in the connector head instead of the flat seal disk, specified by IEC or CECC. This ensures the most reliable sealing function.

RF characteristics

Number of interfaces:
2
Interface type:
N male (50 Ω) per IEC 61169-16
N female (50 Ω) per IEC 61169-16
Interface direction:
straight
Frequency range:
DC to 4 GHz
Average power rating:
100 W
VSWR, max.:
1.06 @ DC to 1 GHz
1.14 @ 1 to 2 GHz
1.20 @ 2 to 3 GHz
1.30 @ 3 to 4 GHz
Insertion loss max.:
3 dB @ DC to 4 GHz (± 0.5 dB)

Mechanical characteristics

Cooling:
convection
Substrate:
aluminum nitride (free of beryllium oxide)
Inner conductor:
copper-alloy / silver-plated
Outer conductor material / surface:
copper-alloy / silver-plated
Case material / surface:
aluminum / untreated
Heat sink material:
aluminum / anodized black
Other metal parts material / surface:
copper-alloy / untreated (absorbing unit)
stainless steel / untreated (absorbing unit)
copper-alloy / bright nickel-plated (connectors)
copper-alloy / CuSnZn-plated (connectors)
Insulation:
PTFE
Housing sealing:
silicone rubber
IP protection level:
IP 50
Weight, approx.:
900.0 g
Length:
135.4 mm
Width:
66.0 mm
Height:
68.0 mm

Environmental conditions

Operating position:
any
Operating temperature:
-40 to +40 °C @ full power 2)
Operating altitude, max.:
2286 m @ full power 2)

Further remarks

2):
The maximum power handling is reduced with rising ambient temperatures; for higher ambient temperature see Power Derating Curve in data sheet
Customs tariff number:
85332900

Downloads

620000-1999-DS.pdf

Product data sheet – 620025 – 620000-1999-DS.pdf