100 W load 350-3000 MHz 7-16 female low PIM IP 68


SPINNER loads offer outstanding electrical and mechanical properties

The modular SPINNER system for loads offers you great flexibility in the selection of your components. It allows you to configure power, frequency range and connectors according to your individual requirements. The advantages are obvious: cost savings through standardization and reliable technical quality.

The 100 W load 350-3000 MHz 7-16 female low PIM IP 68 is placed to the end of the signal path and thus guarantees the correct impedance termination. This reduces disturbing reflections and ensures the maximum performance and quality of the overall system. You can individually combine your attenuator and adapt it to the requirements of your local installation.

The SPINNER 100 W load 350-3000 MHz 7-16 female low PIM IP 68 is very often used as standard product for the installation and calibration of macro mobile radio stations (BTS).

When used for in-building installation, a 100 W load 350-3000 MHz 7-16 female low PIM IP 68 allows you to ensure continuous power and power radiation of your antennas within your building.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

The load enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 100 W.

A SPINNER 100 W load 350-3000 MHz 7-16 female low PIM IP 68 guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -140 dBc and low VSWR values over the entire frequency range and during the entire operating time.

The load offers an interface 7-16 female.

SPINNER loads can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitly stated in our product data sheets.

The 100 W load 350-3000 MHz 7-16 female low PIM IP 68 is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.

The protection class is IP 68.

The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.

RF characteristics

Number of interfaces:
Interface type:
7-16 female (50 Ω) per IEC 61169-4
Interface direction:
Frequency range:
350 to 3000 MHz
Average power rating:
100 W 2)
VSWR, max.:
1.15 @ 350 to 3000 MHz
Passive intermodulation (IM3), max.:
-140 dBc @ 350 to 694 MHz
-150 dBc @ 694 to 800 MHz
-160 dBc @ 800 to 3000 MHz

Mechanical characteristics

IP protection level:
IP 68
Weight, approx.:
3.5 kg

Environmental conditions

Ambient temperature:
-40 to +25 °C (for full power rating)

Further remarks

Customs tariff number:



Safety data sheet – 594274 – Berylliumoxideceramics – SPINNER_BerylliumOxideCeramics.pdf


Model – 594274 – iBwave VEX file – 594274-MS.vex


Product data sheet – 594274 – 594272-75-DS.pdf