1000 W 30 dB attenuator DC-2200 MHz 7-16 female to 7-16 female product photo Front View L
For a larger view click on the picture.

1000 W 30 dB attenuator DC-2200 MHz 7-16 female to 7-16 female

531675
Not available This product is discontinued.

SPINNER attenuators offer outstanding electrical and mechanical properties

The modular SPINNER system for attenuators offers you great flexibility in the selection of your components. It allows you to combine power, attenuation and connectors according to your individual requirements. The advantages are obvious: cost savings through standardisation and reliable technical quality.

The 1000 W 30 dB attenuator DC-2200 MHz 7-16 female to 7-16 female is placed into the signal path and reduces the amplitude of the input signal by 30 dB. This reduces the output power and protects the transmitter of your installation from the effects of excessive power. You can individually combine your attenuator and adapt it to the requirements of your local installation.

The 1000 W 30 dB attenuator DC-2200 MHz 7-16 female to 7-16 female ensures optimum protection for your highly sensitive signal transmission between transmitter and antenna on broadcast sites.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

The attenuator enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 1000 W.

The attenuator offers on one side an interface 7-16 female and on the other side an interface 7-16 female.

SPINNER attenuators can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitely stated in our product data sheets.

The 1000 W 30 dB attenuator DC-2200 MHz 7-16 female to 7-16 female is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.

The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.

RF characteristics

Number of interfaces:
2
Interface type:
7-16 female (50 Ω) per IEC 61169-4
Port / path designation:
Port 1: input
Port 2: output
Interface direction:
straight
Frequency range:
DC to 2200 MHz
Average power rating:
1000 W
Peak power rating, max.:
5.0 kW
VSWR, max.:
Port 1: 1.08 @ DC to 1000 GHz
Port 1: 1.17 @ 1000 to 2200 GHz
Port 2: 1.15 @ DC to 1000 GHz
Port 2: 1.22 @ 1000 to 2200 GHz
Insertion loss max.:
30 dB (± 1 dB)

Mechanical characteristics

Cooling:
convection
Weight, approx.:
17.0 kg
Length:
408.0 mm
Width:
152.0 mm
Height:
285.0 mm

Environmental conditions

Operating position:
cooling fins vertically
Operating temperature:
-40 to 125 °C

Further remarks

Customs tariff number:
85332900

Downloads

SPINNER_BerylliumOxideCeramics.pdf

Safety data sheet – 531675 – Berylliumoxideceramics – SPINNER_BerylliumOxideCeramics.pdf