SPINNER attenuators offer outstanding electrical and mechanical properties
The modular SPINNER system for attenuators offers you great flexibility in the selection of your components. It allows you to combine power, attenuation and connectors according to your individual requirements. The advantages are obvious: cost savings through standardisation and reliable technical quality.
The 150 W 3 dB attenuator 100-6000 MHz 7-16 male to 7-16 female with DC break is placed into the signal path and reduces the amplitude of the input signal by 30 dB. This reduces the output power and protects the transmitter of your installation from the effects of excessive power. You can individually combine your attenuator and adapt it to the requirements of your local installation.
When used for in-building installation, a 150 W 3 dB attenuator 100-6000 MHz 7-16 male to 7-16 female with DC break allows you to ensure continuous power and power radiation of your antennas within your building.
Outstanding RF characteristics, best possible passive intermodulation and VSWR
The attenuator enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 150 W.
The attenuator offers on one side an interface 7-16 male and on the other side an interface 7-16 female.
SPINNER attenuators can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitely stated in our product data sheets.
The 150 W 3 dB attenuator 100-6000 MHz 7-16 male to 7-16 female with DC break is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.
The protection class is IP 50.
The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.
RF characteristics
Number of interfaces:
2
Interface type:
7-16 male (50 Ω) per IEC 61169-4 7-16 female (50 Ω) per IEC 61169-4
Interface direction:
straight
Frequency range:
100 to 3800 MHz 5000 to 6000 MHz
Average power rating:
150 W
VSWR, max.:
1.70 @ 100 to 330 MHz 1.25 @ 330 to 694 MHz 1.20 @ 694 to 2690 MHz 1.30 @ 2690 to 3800 MHz 1.40 @ 5000 to 6000 MHz
Insertion loss max.:
30 dB @ DC to 3.8 GHz (± 1.0 dB) 30 dB @ 4 to 6 GHz (± 1.5 dB)
Special feature:
DC break
Mechanical characteristics
Cooling type:
convection
Substrate material:
aluminum nitride (free of beryllium oxide)
Inner conductor material / surface coating:
copper-alloy / silver-plated
Outer conductor material / coating:
copper-alloy / silver-plated
Housing material / coating:
aluminum / untreated
Material:
aluminum (heat sink)
Surface Coating:
anodized black (heat sink)
Insulation material:
PTFE
Sealing material:
silicone rubber
Degree of protection:
IP 50
Weight, approx.:
1.1 kg
Length:
164.5 mm
Width:
66.0 mm
Height:
108.0 mm
Environmental conditions
Operating position:
any
Operating temperature:
-40 to +40 °C @ full power 2)
Operating altitude, max.:
2286 m (at full power) 2)
Further remarks
Sales Article Number:
A100-7M7F-3-D
2):
The maximum power handling is reduced with rising ambient temperatures; for higher ambient temperature see Power Derating Curve in data sheet