2.2-5 female to 3.5 mm male DC-20 GHz precision adapter product photo Front View L
For a larger view click on the picture.

2.2-5 female to 3.5 mm male DC-20 GHz precision adapter

225346
Compare

SPINNER adapters offer outstanding electrical and mechanical properties

Adapters are used to connect transmission lines with different interface sizes (so-called inter-type or between-lines adapter) or within one size but different interface genders (so-called within-type or in-line adapter).

SPINNER high frequency adapters are optimized for quality and performance and are designed for the lowest possible reflection factors. The outstanding electrical and mechanical properties, the simple installation and the high reliability make SPINNER high-frequency adapters one of the most efficient and cost-effective transition connectors on the market. Precision adaptors with RF quality grade 0 are available upon request.

The SPINNER 2.2-5 female to 3.5 mm male DC-20 GHz precision adapter is characterized by its excellent low IM values and its longevity for test and measurement laboratories. A SPINNER precision adapter increases the lifetime of the connector of the analyzer considerably and thus saves money in the long term.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

A 2.2-5 female to 3.5 mm male DC-20 GHz precision adapter enables you to reliably transmit radio-frequency signals in the frequency range from DC to 20 GHz.

The adaptor offers a transition from interface 2.2-5 female to interface 3.5 mm male. The connector has a straight direction.

The 2.2-5 connectors are perfect for small cell / distributed antenna systems and have been designed to meet the latest requirements in terms of size, ruggedness, performance and other parameters of radio frequency signal transmission. The small footprint supports the use of smaller components, reduces the risks associated with assembling devices without care, and provides excellent electrical performance.

3.5 mm coax connectors can be used up to 33 GHz and have low manufacturing tolerances. They are designed for many mating cycles It has an air dielectric interface and closely controlled center conductor support bead providing mechanical interface tolerances similar to hermaphroditic connectors. A 3.5 mm coaxial interface can be mechanically mated with 2.92 mm and SMA connectors, but the connection creates a signal reflection that must be considered.

RF characteristics

Number of interfaces:
2
Interface type:
2.2-5 female (50 Ω) per IEC 61169-66
3.5 mm male (50 Ω) per IEC 60169-23
Interface direction:
straight
Mounting type:
none
Frequency range:
DC to 20 GHz
Return loss min.:
40 dB @ DC to 4 GHz
35 dB @ 4 to 6 GHz
30 dB @ 6 to 12 GHz
25 dB @ 12 to 20 GHz

Mechanical characteristics

Inner conductor material / surface coating:
CuBe age hardened / gold-plated
Outer conductor material / coating:
copper-alloy / gold-plated
Insulation material:
LCP
cross linked polystyrene
Weight, approx.:
60.0 g
Marking:
laser engraving

Environmental conditions

Operating temperature:
+18 to +28 °C
Storage ambient temperature:
-40 to +70 °C
Storage relative humidity, max.:
95% (condensation not allowed)

Scope of delivery & accessories

Delivery scope:
protective caps

Further remarks

Customs tariff number:
85366910

Downloads

225346-DS.pdf

Product data sheet – 225346 – 225346-DS.pdf

REACH_Test&Measurement_10123444-TD.pdf

Technical document – 225346 – REACH-Certificate for Test & Measurement Products – REACH_Test&Measurement_10123444-TD.pdf

RoHS_Test&Measurement_10121583-TD.pdf

Technical document – 225346 – RoHS-Certificate for Test & Measurement Products – RoHS_Test&Measurement_10121583-TD.pdf