25 W 20 dB attenuator DC-6 GHz 7-16 male to 7-16 female product photo Front View L
For a larger view click on the picture.

25 W 20 dB attenuator DC-6 GHz 7-16 male to 7-16 female

620022
Compare

SPINNER attenuators offer outstanding electrical and mechanical properties

The modular SPINNER system for attenuators offers you great flexibility in the selection of your components. It allows you to combine power, attenuation and connectors according to your individual requirements. The advantages are obvious: cost savings through standardisation and reliable technical quality.

The 25 W 20 dB attenuator DC-6 GHz 7-16 male to 7-16 female is placed into the signal path and reduces the amplitude of the input signal by 20 dB. This reduces the output power and protects the transmitter of your installation from the effects of excessive power. You can individually combine your attenuator and adapt it to the requirements of your local installation.

When used for in-building installation, a 25 W 20 dB attenuator DC-6 GHz 7-16 male to 7-16 female allows you to ensure continuous power and power radiation of your antennas within your building.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

The attenuator enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 25 W.

The attenuator offers on one side an interface 7-16 male and on the other side an interface 7-16 female.

SPINNER attenuators can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitely stated in our product data sheets.

The 25 W 20 dB attenuator DC-6 GHz 7-16 male to 7-16 female is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.

The protection class is IP 50.

The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.

RF characteristics

Number of interfaces:
2
Interface type:
7-16 male (50 Ω) per IEC 61169-4
7-16 female (50 Ω) per IEC 61169-4
Interface direction:
straight
Frequency range:
DC to 6 GHz
Average power rating:
25 W
VSWR, max.:
1.06 @ DC to 1 GHz
1.14 @ 1 to 2 GHz
1.20 @ 2 to 3 GHz
1.30 @ 3 to 4 GHz
1.40 @ 4 to 6 GHz
Insertion loss max.:
20 dB @ DC to 4 GHz (± 1.0 dB)
20 dB @ 4 to 6 GHz (± 1.3 dB)

Mechanical characteristics

Cooling type:
convection
Substrate material:
aluminum nitride (free of beryllium oxide)
Inner conductor material / surface coating:
copper-alloy / silver-plated
Outer conductor material / coating:
copper-alloy / silver-plated
Housing material / coating:
aluminum / untreated
Material:
aluminum (heat sink)
Surface Coating:
anodized black (heat sink)
Insulation material:
PTFE
Sealing material:
silicone rubber
Degree of protection:
IP 50
Weight, approx.:
600.0 g
Length:
140.5 mm
Width:
60.0 mm
Height:
32.0 mm

Environmental conditions

Operating position:
any
Operating temperature:
-40 to +40 °C @ full power 2)
Operating altitude, max.:
2286 m (at full power) 2)

Further remarks

Sales Article Number:
A25-7M7F-20-E
2):
The maximum power handling is reduced with rising ambient temperatures; for higher ambient temperature see Power Derating Curve in data sheet
Customs tariff number:
85332900

Downloads

620000-1999-DS.pdf

Product data sheet – 620022 – 620000-1999-DS.pdf

620022-MS.vex

Model – 620022 – iBwave VEX file – 620022-MS.vex

REACH_Mobile_Communication_10123443-TD.pdf

Technical document – 620022 – REACH-Certificate for Mobile Communication Products – REACH_Mobile_Communication_10123443-TD.pdf

RoHS_Mobile_Communication_10123425-TD.pdf

Technical document – 620022 – RoHS-Certificate for Mobile Communication Products – RoHS_Mobile_Communication_10123425-TD.pdf