4.3-10 female to 3.5 mm female adapter

432023
Compare

SPINNER adapters offer outstanding electrical and mechanical properties

Adapters are used to connect transmission lines with different interface sizes (so-called inter-type or between-lines adapter) or within one size but different interface genders (so-called within-type or in-line adapter).

SPINNER high frequency adapters are optimized for quality and performance and are designed for the lowest possible reflection factors. The outstanding electrical and mechanical properties, the simple installation and the high reliability make SPINNER high-frequency adapters one of the most efficient and cost-effective transition connectors on the market. Precision adaptors with RF quality grade 0 are available upon request.

The SPINNER 4.3-10 female to 3.5 mm female adapter guarantees excellent, lossless mobile communication quality for use in in-building distributed antenna systems (DAS) or on mobile communication base stations outdoors.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

A 4.3-10 female to 3.5 mm female adapter enables you to reliably transmit radio-frequency signals in the frequency range from DC to 6 GHz.

The adaptor offers a transition from interface 4.3-10 female to interface 3.5 mm female. The connector has a straight direction.

The 4.3-10 connector system was designed to meet the latest requirements in mobile communication in terms of size, robustness, performance, and other parameters. Its small footprint supports the use of smaller components, mitigates risks if equipment is assembled without due care, and delivers outstanding electrical performance.

3.5 mm coax connectors can be used up to 33 GHz and have low manufacturing tolerances. They are designed for many mating cycles It has an air dielectric interface and closely controlled center conductor support bead providing mechanical interface tolerances similar to hermaphroditic connectors. A 3.5 mm coaxial interface can be mechanically mated with 2.92 mm and SMA connectors, but the connection creates a signal reflection that must be considered.

RF characteristics

Number of interfaces:
2
Interface type:
4.3-10 female (50 Ω) per IEC 61169-54
3.5 mm female (50 Ω) per IEC 60169-23
Interface direction:
straight
Mounting type:
none
Frequency range:
DC to 6 GHz
VSWR, max.:
1.02 @ DC to 2 GHz
1.04 @ 2 to 3 GHz
1.08 @ 3 to 6 GHz

Mechanical characteristics

Inner conductor material / surface coating:
copper-alloy / gold-plated
Outer conductor material / coating:
copper-alloy / silver-plated
copper-alloy / CuSnZn-plated
Insulation material:
PTFE
Degree of protection:
IP 68
Degree of protection remark:
4.3-10 female connected with appropriate gasket
3.5 mm female connected with appropriate gasket
Weight, approx.:
30.0 g

Further remarks

Customs tariff number:
85366990

Downloads

432023-DS.pdf

Product data sheet – 432023 – 432023-DS.pdf

432023-MS.vex

Model – 432023 – iBwave VEX file – 432023-MS.vex

REACH_Mobile_Communication_10123443-TD.pdf

Technical document – 432023 – REACH-Certificate for Mobile Communication Products – REACH_Mobile_Communication_10123443-TD.pdf

RoHS_Mobile_Communication_10123425-TD.pdf

Technical document – 432023 – RoHS-Certificate for Mobile Communication Products – RoHS_Mobile_Communication_10123425-TD.pdf