80 W 13 dB attenuator 694-2700 MHz 4.3-10 female to 4.3-10 female low PIM IP 65 product photo Front View L
For a larger view click on the picture.

80 W 13 dB attenuator 694-2700 MHz 4.3-10 female to 4.3-10 female low PIM IP 65

745126
Not available This product is discontinued.

SPINNER attenuators offer outstanding electrical and mechanical properties

The modular SPINNER system for attenuators offers you great flexibility in the selection of your components. It allows you to combine power, attenuation and connectors according to your individual requirements. The advantages are obvious: cost savings through standardisation and reliable technical quality.

The 80 W 13 dB attenuator 694-2700 MHz 4.3-10 female to 4.3-10 female low PIM IP 65 is placed into the signal path and reduces the amplitude of the input signal by 13 dB. This reduces the output power and protects the transmitter of your installation from the effects of excessive power. You can individually combine your attenuator and adapt it to the requirements of your local installation.

The SPINNER 80 W 13 dB attenuator 694-2700 MHz 4.3-10 female to 4.3-10 female low PIM IP 65 is often used in the installation and calibration of mobile radio stations.

When used for in-building installation, a 80 W 13 dB attenuator 694-2700 MHz 4.3-10 female to 4.3-10 female low PIM IP 65 allows you to ensure continuous power and power radiation of your antennas within your building.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

The attenuator enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 80 W.

A SPINNER 80 W 13 dB attenuator 694-2700 MHz 4.3-10 female to 4.3-10 female low PIM IP 65 guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -150 dBc and low VSWR values over the entire frequency range and during the entire operating time.

The attenuator offers on one side an interface 4.3-10 female and on the other side an interface 4.3-10 female.

SPINNER attenuators can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitely stated in our product data sheets.

The 80 W 13 dB attenuator 694-2700 MHz 4.3-10 female to 4.3-10 female low PIM IP 65 is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.

The protection class is IP 65.

The 4.3-10 connector system was designed to meet the latest requirements in mobile communication in terms of size, robustness, performance, and other parameters. Its small footprint supports the use of smaller components, mitigates risks if equipment is assembled without due care, and delivers outstanding electrical performance.

RF characteristics

Number of interfaces:
2
Interface type:
4.3-10 female (50 Ω) per IEC 61169-54
Port / path designation:
Port 1: input
Port 2: output
Interface direction:
straight
Frequency range:
694 to 2700 MHz
Average power rating:
80 W
VSWR, max.:
1.25
Insertion loss max.:
13 dB (± 0.8 dB)
Passive intermodulation (IM3), max.:
-150 dBc @ 694 to 870 MHz
-160 dBc @ 870 to 2700 MHz

Mechanical characteristics

Cooling:
convection
IP protection level:
IP 65
IP protection level remark:
outdoor
Weight, approx.:
3.0 kg

Environmental conditions

Environmental conditions:
ETSI EN 300019-1-1 Class 1.2
ETSI EN 300019-1-2 Class 2.3
ETSI EN 300019-1-4 Class 4.1E
Ambient temperature:
-40 to +50 °C (for full power rating)
+50 to +85 °C (limited power rating, see derating curve)

Scope of delivery & accessories

Mounting accessoires:
to be ordered separately under BN B07787

Downloads

745126-MS.vex

Model – 745126 – iBwave VEX file – 745126-MS.vex

745121-29-DS.pdf

Product data sheet – 745126 – 745121-29-DS.pdf