Coaxial hybrid jumper cable assembly SF 1/2"-50-PE-LF 7/8"-50-PE 7-16 male 7-16 male 7 m product photo Front View L
For a larger view click on the picture.

Coaxial hybrid jumper cable assembly SF 1/2"-50-PE-LF 7/8"-50-PE 7-16 male 7-16 male 7 m

JH0032
Compare

SpinnerFlex®Hybrid - optimal connectivity, easy installation, and fault-free functioning

SpinnerFlex®Hybrid pre-fabricated coaxial cables (jumper cable assemblies) are the ideal solution for radio frequency signal transmission between base stations and antennas. They offer top-quality design, materials and manufacturing, ensuring optimal connectivity, easy installation, and fault-free functioning, even under extremely harsh environmental conditions.

A coaxial hybrid jumper cable assembly SF 1/2"-50-PE-LF 7/8"-50-PE 7-16 male 7-16 male 7 m is part of the pre-fabricated SpinnerFlex® Hybrid jumper product group. These are jumper-feeder combinations with SF 1/2" coaxial cables at both ends. Most of the cable consists of a LF7/8" feeder line, with transitions to considerably more flexible SF 1/2” jumpers that are made in our factory by an automated process. Thus, you save not only several connectors at the mobile communication site, but also complete installation much faster while ensuring the best possible connection between the base station and antenna.

Outstanding IM characteristics with maximum passive intermodulation

A SPINNER coaxial hybrid jumper cable assembly SF 1/2"-50-PE-LF 7/8"-50-PE 7-16 male 7-16 male 7 m guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -160 dBc and low VSWR values over the entire frequency range and during the entire operating time of the cable. The robust construction defies even harsh outdoor conditions and for a temperature range from -55 to +85 °C. SPINNER coaxial cable assemblies comply with the RoHS 2002/95 Directive. The length of the cable is 7.0 m. The rugged coaxial cable has inner conductors made of copper, a PE dielectric insulation and a copper outer conductor. Inner and outer conductors are soldered 360° inductively. The degree of protection IP68 according to IEC 60529 is guaranteed.

A coaxial hybrid jumper cable assembly SF 1/2"-50-PE-LF 7/8"-50-PE 7-16 male 7-16 male 7 m has 7-16 male connectors pre-mounted on both sides of the cable.

The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.

RF characteristics

Number of interfaces:
2
Interface type:
7-16 male (50 Ω) per IEC 61169-4
Interface direction:
Port 1: straight
Port 2: straight
Frequency range:
DC to 3800 MHz
Average power rating:
0.91 kW @ 960 MHz (at 40 °C ambient temperature)
0.56 kW @ 2200 MHz (at 40 °C ambient temperature)
0.49 kW @ 2700 MHz (at 40 °C ambient temperature)
0.35 kW @ 3800 MHz (at 40 °C ambient temperature)
VSWR, max.:
1.09 @ 380 to 960 MHz
1.13 @ 1700 to 2200 MHz
1.16 @ 2200 to 2700 MHz
1.22 @ 3300 to 3800 MHz 1) 2)
VSWR, typ.:
1.06 @ 380 to 960 MHz
1.08 @ 1700 to 2200 MHz
1.09 @ 2200 to 2700 MHz
1.16 @ 3300 to 3800 MHz 1) 2)
Insertion loss coefficient /100m:
Port 1: 11.56 dB @ 960 MHz (jumper SF 1/2", at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Port 1: 18.64 dB @ 2200 MHz (jumper SF 1/2", at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Port 1: 21.06 dB @ 2700 MHz (jumper SF 1/2", at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Port 1: 25.90 dB @ 3800 MHz (jumper SF 1/2", at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Port 2: 4.02 dB @ 960 MHz (feeder LF 7/8", at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Port 2: 6.46 dB @ 2200 MHz (feeder LF 7/8", at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Port 2: 7.29 dB @ 2700 MHz (feeder LF 7/8", at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Port 2: 8.90 dB @ 3800 MHz (feeder LF 7/8", at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Passive intermodulation (IM3), max.:
-160 dBc
Passive intermod. (IM3), typ.:
-165 dBc

Mechanical characteristics

Cable type:
SF 1/2"-50-PE + LF 7/8"-50-PE feeder line
Crush resistance:
1.9 kg/mm (SF 1/2"-50)
1.4 kg/mm (LF 7/8"-50)
Clamp spacing:
800 mm (SF 1/2"-50)
1000 mm (LF 7/8"-50)
Single bending radius, min.:
25 mm (SF 1/2"-50)
120 mm (LF 7/8"-50)
Repeated bending radius, min.:
32 mm (SF 1/2"-50)
250 mm (LF 7/8"-50)
Inner conductor material / surface coating:
Cu-alloy / Ag-plated
Outer conductor material / coating:
Cu-alloy / Ag-plated
Jacket material:
PE
Insulation material:
PTFE, PE
Sealing material:
Silicone rubber
Colour:
black
Degree of protection:
IP 68
Degree of protection remark:
0.1 bar / 6 hours / unmated
1 bar / 1 hour / mated
RoHS compliance:
compliant to directive 2011/65/EU and amendment (EU) 2015/863
compliant to directive RoHS 2002/95/EC
Weight remark:
Jumper 0.45 kg each end
Feeder 0.50 kg x Lf / 1000 = 5 kg
Length:
7.0 m
Dimensions remark:
Jumper Lj = 1000 mm
Feeder Lf = L - 2 x Lj = 5

Environmental conditions

Installation temperature range:
-40 to +60 °C
Operating temperature:
-55 to +85 °C
Storage ambient temperature:
-70 to +85 °C

Further remarks

Sales Article Number:
JH-7M7M-7M
Remark:
SpinnerFlex® Hybrid Jumper assemblies combine the low losses of a LF 7/8" feeder cable with the flexibility and the easy handling of a SF 1/2" jumper. The factory assembled and tested cables eliminate any installation errors and minimize installation time. Outstanding IM-Performance, low VSWR and IP 68 weather protection make these cable assemblies predestinated for all BTS setups with remote radio head.
1):
The given VSWR values are maintained within all global cellular frequency bands.
Customs tariff number:
85442000

Downloads

JH78-DS.pdf

Product data sheet – JH0032 – JH78-DS.pdf

M30804.pdf

Handling instructions – JH0032 – M30804.pdf