Coaxial jumper cable assembly SF 1/2"-50-PE 4.3-10 male right angle screw 4.3-10 male right angle screw 4 m product photo Front View L
For a larger view click on the picture.

Coaxial jumper cable assembly SF 1/2"-50-PE 4.3-10 male right angle screw 4.3-10 male right angle screw 4 m

JI0280
Compare

SpinnerFlex®TopFit - ideal for signal transmission between base stations and antennas

SpinnerFlex®TopFit pre-fabricated coaxial cables (jumper cable assemblies) are the ideal solution for radio frequency signal transmission between base stations and antennas. They offer top-quality design, materials and manufacturing, ensuring optimal connectivity, easy installation, and fault-free functioning, even under extremely harsh environmental conditions.

A coaxial jumper cable assembly SF 1/2"-50-PE 4.3-10 male right angle screw 4.3-10 male right angle screw 4 m is a high quality, super flexible corrugated cable of the size SF 1/2". It provides a reliable and stable transmission of radio frequency signals in the frequency range DC to 3800 MHz. The cable is optimally shielded against interference, providing excellent, loss-free mobile communication quality for use in in-building distributed antenna systems (DAS) or in mobile communication base stations. In addition, a prefabricated coaxial jumper cable assembly SF 1/2"-50-PE 4.3-10 male right angle screw 4.3-10 male right angle screw 4 m is also suitable for a variety of demanding industrial applications or broadcast.

Outstanding IM characteristics with maximum passive intermodulation

A SPINNER coaxial jumper cable assembly SF 1/2"-50-PE 4.3-10 male right angle screw 4.3-10 male right angle screw 4 m guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -160 dBc and low VSWR values over the entire frequency range and during the entire operating time of the cable. The robust construction defies even harsh outdoor conditions and for a temperature range from -55 to +85 °C. SPINNER coaxial cable assemblies comply with the RoHS 2002/95 Directive. The length of the cable is 4.0 m. The rugged coaxial cable has inner conductors made of copper, a PE dielectric insulation and a copper outer conductor. Inner and outer conductors are soldered 360° inductively. The degree of protection IP68 according to IEC 60529 is guaranteed.

A coaxial jumper cable assembly SF 1/2"-50-PE 4.3-10 male right angle screw 4.3-10 male right angle screw 4 m has 4.3-10 male right angle screw connectors pre-mounted on both sides of the cable. Right-angled plugs also allow for installation in tight spaces or special cable feeds. If two right-angled connections are selected, the angle of rotation of the connectors can be determined to each other - 0, 90 or 180 degrees.

The 4.3-10 connector system was designed to meet the latest requirements in mobile communication in terms of size, robustness, performance, and other parameters. Its small footprint supports the use of smaller components, mitigates risks if equipment is assembled without due care, and delivers outstanding electrical performance.

The screw connection, especially when mounted with a suitable torque wrench, provides the strongest hold and a constantly secure fit of the cable. In addition, the center slots in the contacts provide high contact pressure between the cable and the connector for optimum conductivity and signal strength.

RF characteristics

Number of interfaces:
2
Interface type:
4.3-10 male (50 Ω) per IEC 61169-54 [screw]
Interface direction:
Port 1: right angle
Port 2: right angle
Frequency range:
DC to 3800 MHz
Average power rating:
0.91 kW @ 960 MHz (at 40 °C ambient temperature)
0.56 kW @ 2200 MHz (at 40 °C ambient temperature)
0.49 kW @ 2700 MHz (at 40 °C ambient temperature)
0.42 kW @ 3800 MHz (at 40 °C ambient temperature)
0.31 kW @ 5825 MHz (at 40 °C ambient temperature)
VSWR, max.:
1.07 @ DC to 960 MHz
1.10 @ 960 to 2200 MHz
1.14 @ 2200 to 2700 MHz
1.16 @ 2700 to 3800 MHz 1)
VSWR, typ.:
1.05 @ DC to 960 MHz
1.07 @ 960 to 2200 MHz
1.08 @ 2200 to 2700 MHz
1.12 @ 2700 to 3800 MHz 1)
Insertion loss coefficient /100m:
11.56 dB @ 960 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
18.64 dB @ 2200 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
21.06 dB @ 2700 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
25.90 dB @ 3800 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
33.79 dB @ 5825 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Passive intermodulation (IM3), max.:
-160 dBc
Passive intermod. (IM3), typ.:
-165 dBc

Mechanical characteristics

Cable type:
SF 1/2"-50-PE
Crush resistance:
20.4 N/mm
Clamp spacing:
800 mm
Single bending radius, min.:
25 mm
Repeated bending radius, min.:
32 mm
Inner conductor material / surface coating:
Cu-alloy / Ag-plated
Outer conductor material / coating:
Cu-alloy / Ag-plated
Jacket material:
PE
Insulation material:
PTFE, PE
Sealing material:
Silicone rubber
Colour:
black
Degree of protection:
IP 68
Degree of protection remark:
0.1 bar / 6 hours / unmated
1 bar / 1 hour / mated
RoHS compliance:
compliant to directive 2011/65/EU and amendment (EU) 2015/863
compliant to directive RoHS 2002/95/EC
Length:
4.0 m
Outer jacket diameter, nom.:
13.7 mm
Length Tolerances:
±40 mm

Environmental conditions

Installation temperature range:
-40 to +60 °C
Operating temperature:
-55 to +85 °C
Storage ambient temperature:
-70 to +85 °C

Further remarks

Sales Article Number:
JS12-43RS43RS-4M
1):
The given VSWR values are maintained within all global cellular frequency bands.
Customs tariff number:
85442000

Downloads

JC-DS.pdf

Product data sheet – JI0280 – JC-DS.pdf

M30804.pdf

Handling instructions – JI0280 – M30804.pdf