Coaxial jumper cable assembly SX 141-50-FEP 4.3-10 male screw SMA male right angle 1 m product photo Front View L
For a larger view click on the picture.

Coaxial jumper cable assembly SX 141-50-FEP 4.3-10 male screw SMA male right angle 1 m

JF0203
Compare

SERIFLEX for indoor and housing interior installation

SERIFLEX cables are designed for indoor and housing interior installation and guarantee protection rating IP50 under standard IEC 60529. They also meet the RoHS 2002/95 guideline.

A coaxial jumper cable assembly SX 141-50-FEP 4.3-10 male screw SMA male right angle 1 m is manufactured with an outer conductor made of lead-free tin-plated copper mesh. This selection of materials allows you to permanently bend the cable as desired with the cable retaining its shape and its RF properties.

Outstanding IM characteristics with maximum passive intermodulation

A SPINNER coaxial jumper cable assembly SX 141-50-FEP 4.3-10 male screw SMA male right angle 1 m guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -150 dBc (typ.) and low VSWR values over the entire frequency range and during the entire operating time of the cable. The robust construction defies even harsh outdoor conditions and for a temperature range from -55 to +85 °C. SPINNER coaxial cable assemblies comply with the RoHS 2002/95 Directive. The length of the cable is 1.0 m. The rugged coaxial cable has inner conductors made of copper, a PE dielectric insulation and a copper outer conductor. Inner and outer conductors are soldered 360° inductively. The degree of protection IP68 according to IEC 60529 is guaranteed.

On one end there is a 4.3-10 male screw connector pre-assembled, on the other end there is a SMA male right angle connector. Thus, you can use the cable as an adapter for the transition between 4.3-10 and SMA connector systems. Right-angled plugs also allow for installation in tight spaces or special cable feeds. If two right-angled connections are selected, the angle of rotation of the connectors can be determined to each other - 0, 90 or 180 degrees.

The 4.3-10 connector system was designed to meet the latest requirements in mobile communication in terms of size, robustness, performance, and other parameters. Its small footprint supports the use of smaller components, mitigates risks if equipment is assembled without due care, and delivers outstanding electrical performance.

The term SMA stands for Sub-Miniature-A. SAM connectors are quite small, but mechanically very robust due to the screwed swivel nut.

The screw connection, especially when mounted with a suitable torque wrench, provides the strongest hold and a constantly secure fit of the cable. In addition, the center slots in the contacts provide high contact pressure between the cable and the connector for optimum conductivity and signal strength.

RF characteristics

Number of interfaces:
2
Interface type:
4.3-10 male (50 Ω) per IEC 61169-54 [screw]
SMA male (50 Ω) per IEC 60169-15
Interface direction:
Port 1: straight
Port 2: right angle
Frequency range:
DC to 3800 MHz
Average power rating:
0.42 kW @ 960 MHz (at 40 °C ambient temperature)
0.27 kW @ 2200 MHz (at 40 °C ambient temperature)
0.24 kW @ 2700 MHz (at 40 °C ambient temperature)
0.20 kW @ 3800 MHz (at 40 °C ambient temperature)
VSWR, max.:
1.07 @ DC to 960 MHz
1.10 @ 960 to 2200 MHz
1.15 @ 2200 to 2700 MHz
1.20 @ 2700 to 3800 MHz 2)
Insertion loss coefficient /100m:
40.1 kW @ 960 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
64.2 kW @ 2200 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
72.2 kW @ 2700 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
87.6 kW @ 3800 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Passive intermod. (IM3), typ.:
-150 dBc 1)

Mechanical characteristics

Cable type:
SX 141-50-FEP
Single bending radius, min.:
10 mm
Repeated bending radius, min.:
40 mm
Inner conductor material / surface coating:
Cu-alloy / Ag-plated
Outer conductor material / coating:
Cu-alloy / Ag-plated or CuSnZn-plated
Jacket material:
FEP
Insulation material:
PTFE, PE
Sealing material:
Silicone rubber
Colour:
blue
Degree of protection:
IP 50
RoHS compliance:
compliant to directive 2011/65/EU and amendment (EU) 2015/863
compliant to directive RoHS 2002/95/EC
Length:
1.0 m
Outer jacket diameter, nom.:
4.1 mm
Length Tolerances:
± 10 mm

Environmental conditions

Installation temperature range:
-20 to 70 °C
Operating temperature:
-65 to 165 °C
Storage ambient temperature:
-65 to 180 °C

Further remarks

Sales Article Number:
JX141-43MSSMAR-1M
1):
static measurement, jumper cables with different IM3 values are available on request
2):
The given VSWR values are maintained within all global cellular frequency bands.
Customs tariff number:
85442000

Downloads

JFSX141-DS.pdf

Product data sheet – JF0203 – JFSX141-DS.pdf

REACH_Mobile_Communication_10123443-TD.pdf

Technical document – JF0203 – REACH-Certificate for Mobile Communication Products – REACH_Mobile_Communication_10123443-TD.pdf

RoHS_Mobile_Communication_10123425-TD.pdf

Technical document – JF0203 – RoHS-Certificate for Mobile Communication Products – RoHS_Mobile_Communication_10123425-TD.pdf

M30811.pdf

Handling instructions – JF0203 – M30811.pdf