Coaxial jumper phase cable assembly LF 1/2"-50-PE 7-16 male 7-16 male 10 m product photo Front View L
For a larger view click on the picture.

Coaxial jumper phase cable assembly LF 1/2"-50-PE 7-16 male 7-16 male 10 m

JD0424
Compare

Low PIM cables for measurement and test

Cables are among the most-used components in testing labs. SPINNER has developed exceptionally good low PIM cables for measurement and test.

A coaxial jumper phase cable assembly LF 1/2"-50-PE 7-16 male 7-16 male 10 m is characterized by its extremely good PIM performance. Extra-long anti-kink sleeves make them highly robust and long-lasting, optimized for repeated bending.

Outstanding IM characteristics with maximum passive intermodulation

A SPINNER coaxial jumper phase cable assembly LF 1/2"-50-PE 7-16 male 7-16 male 10 m guarantees outstanding IM characteristics with maximum passive intermodulation (IM3) of -156 dBc and low VSWR values over the entire frequency range and during the entire operating time of the cable. The robust construction defies even harsh outdoor conditions and for a temperature range from -55 to +85 °C. SPINNER coaxial cable assemblies comply with the RoHS 2002/95 Directive. The length of the cable is 10.0 m. The rugged coaxial cable has inner conductors made of copper, a PE dielectric insulation and a copper outer conductor. Inner and outer conductors are soldered 360° inductively. The degree of protection IP68 according to IEC 60529 is guaranteed.

A coaxial jumper phase cable assembly LF 1/2"-50-PE 7-16 male 7-16 male 10 m has 7-16 male connectors pre-mounted on both sides of the cable.

The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.

RF characteristics

Number of interfaces:
2
Interface type:
7-16 male (50 Ω) per IEC 61169-4
Interface direction:
Port 1: straight
Port 2: straight
Frequency range:
DC to 3800 MHz
Average power rating:
1.06 kW @ 960 MHz (at 40 °C ambient temperature)
0.67 kW @ 2200 MHz (at 40 °C ambient temperature)
0.59 kW @ 2700 MHz (at 40 °C ambient temperature)
0.50 kW @ 3800 MHz (at 40 °C ambient temperature)
0.38 kW @ 5825 MHz (at 40 °C ambient temperature)
VSWR, max.:
1.07 @ DC to 960 MHz
1.08 @ 960 to 2200 MHz
1.12 @ 2200 to 2700 MHz
1.14 @ 2700 to 3800 MHz 1)
VSWR, typ.:
1.04 @ DC to 960 MHz
1.06 @ 960 to 2200 MHz
1.07 @ 2200 to 2700 MHz
1.11 @ 2700 to 3800 MHz 1)
Insertion loss coefficient /100m:
7.12 dB @ 960 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
11.25 dB @ 2200 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
12.63 dB @ 2700 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
15.36 dB @ 3800 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
19.71 dB @ 5825 MHz (at 20 °C cable temperature, values without connectors, typ. connector attenuation is ≤ 0.01 dB)
Phase length defined:
yes
Passive intermodulation (IM3), max.:
-156 dBc
Passive intermod. (IM3), typ.:
-165 dBc

Mechanical characteristics

Cable type:
LF 1/2"-50-PE
Crush resistance:
19.6 N/mm
Clamp spacing:
1000 mm
Single bending radius, min.:
70 mm
Repeated bending radius, min.:
125 mm
Inner conductor material / surface coating:
Cu-alloy / Ag-plated
Outer conductor material / coating:
Cu-alloy / Ag-plated or CuSnZn-plated
Jacket material:
PE
Insulation material:
PTFE, PE
Sealing material:
Silicone rubber
Colour:
black
Degree of protection:
IP 68
Degree of protection remark:
0.1 bar / 6 hours / unmated
1 bar / 1 hour / mated
RoHS compliance:
compliant to directive 2011/65/EU and amendment (EU) 2015/863
compliant to directive RoHS 2002/95/EC
Length:
10.0 m
Outer jacket diameter, nom.:
15.8 mm
Length Tolerances:
±100 mm

Environmental conditions

Installation temperature range:
-40 to +60 °C
Operating temperature:
-55 to +85 °C
Storage ambient temperature:
-70 to +85 °C

Further remarks

Sales Article Number:
JL12-7M7M-10M-P
1):
The given VSWR values are maintained within all global cellular frequency bands.
Customs tariff number:
85442000

Downloads

JD-DS.pdf

Product data sheet – JD0424 – JD-DS.pdf

REACH_Mobile_Communication_10123443-TD.pdf

Technical document – JD0424 – REACH-Certificate for Mobile Communication Products – REACH_Mobile_Communication_10123443-TD.pdf

RoHS_Mobile_Communication_10123425-TD.pdf

Technical document – JD0424 – RoHS-Certificate for Mobile Communication Products – RoHS_Mobile_Communication_10123425-TD.pdf

M30804.pdf

Handling instructions – JD0424 – M30804.pdf