DC/DC-Converter contactless 24V/24V 100 Watt

636688

RF characteristics

Number of interfaces:
2
Channel count:
1

Contactless DC-power transmission characteristics

Number of DC-channels:
1
Interface type DC-Input:
2 single wires at stator side, AWG18 | Cable length stationary part: 550mm ± 50mm
Interface type DC-Output:
2 single wires at stator side, AWG18 | Cable length rotating part: 550mm ± 50mm
Input voltage:
20.4 V to 28.8 V DC | Power Supply has to be a SELV type acc. to IEC60950-1
The current must be externally limited to 5 A
Output voltage:
24 V DC ±3%
Output current, continuous:
4.2 A | Over full temperature range
Output voltage Ripple, max.:
80 mV
Efficiency, typ.:
85% | @ full load
Applied standards:
DIN EN 55022 | Radio disturbance characteristics (B)
DIN EN 61000-4-2 | ESD immunity
DIN EN 61000-4-3 | RF immunity, radiated
DIN EN 61000-4-4 | Transient / burst immunity
DIN EN 61000-4-6 | RF immunity, conducted
Applicable EU directive:
EMC Directive 2004/108/EC

Mechanical characteristics

Rotating speed, max.:
300.0 rpm
Lifetime:
200 x 10⁶ revolutions
Maintenance period:
not required
MTBF:
300 000 h
Torque (room / min. temperature), max.:
0.5 Nm / 1.0 Nm @ start-up
0.4 Nm / 0.8 Nm @ rotation
Interface loads, max.:
no loads allowed
Case material / surface:
aluminum-alloy / painted in RAL 9005 jet black
IP protection level:
IP 54
IP protection level remark:
all interfaces connected with appropriate gaskets
Weight, approx.:
1.0 kg
Marking:
adhesive label

Environmental conditions

Operating temperature:
-30 °C to +71 °C
Relative humidity, max.:
95% (condensation not allowed)
Shock:
30 g / 11 ms half sine, 3 shocks in each direction of 3 orthogonal axes
Vibration:
20-50 Hz, PSD of 0,02 g²/Hz falling to 0,001 g²/Hz at 500 Hz in each of 3 orthogonal axes.
Duration: 15 min/axis.
Compliant to MIL-STD-810G
Storage ambient temperature:
-40 °C to +85 °C
Storage relative humidity, max.:
95% (condensation not allowed)

Downloads

636688-DS.pdf

Product data sheet – 636688 – 636688-DS.pdf