Double sameband multiplexer 1800 MHz 7-16 female DC port 1 to 3, 2 to 3 product photo Front View L
For a larger view click on the picture.

Double sameband multiplexer 1800 MHz 7-16 female DC port 1 to 3, 2 to 3

570614
Compare

SPINNER Combining Units for best radio frequency networks performance

Combining units are essential components in radio frequency networks, used to merge signals from multiple sources or split signals into multiple paths while maintaining signal integrity. All combiners work in bi-directional mode and can therefore be used to combine and split the transmitted and received signals.

The Double sameband multiplexer 1800 MHz 7-16 female DC port 1 to 3, 2 to 3 guarantees excellent, lossless mobile communication quality for use in in-building distributed antenna systems (DAS) or on mobile communication base stations outdoors.

A sameband combiner is used to combine multiple signals within the same 3GPP defined frequency band into a single output. This system is vital for enhancing signal strength and coverage without causing inter-band interference. It simplifies network architecture by allowing multiple transmitters to share a single antenna system, thereby reducing equipment needs and optimizing space.

They are typically used in:

  • Cellular networks: Sameband combiners are commonly used in cellular networks where multiple base stations need to coexist within the same frequency range.
  • Shared antennas: They allow different technologies (e.g., GSM, 3G, LTE) to share a single antenna, reducing the need for separate antennas for each service.
  • In-Building Coverage: Sameband combiners enhance in-building distributed antenna systems (DAS) by combining signals from nearby base stations.

Critical characteristics are:

  • Cost-effectiveness: shared infrastructure reduces costs for operators and building owners.
  • Efficient spectrum utilization: Sameband combiners optimize spectrum usage by allowing multiple services to coexist.
  • Quick deployment: easy installation speeds up network rollout.
  • Future-proof: Sameband combiners accommodate technology upgrades and changing frequency requirements.

Benefits are:

  • Cost-effectiveness: shared infrastructure reduces costs for operators and building owners.
  • Efficient spectrum utilization: Sameband combiners optimize spectrum usage by allowing multiple services to coexist.
  • Quick deployment: easy installation speeds up network rollout.
  • Future-Proof: Sameband combiners accommodate technology upgrades and changing frequency requirements.

SPINNER’s Sameband Combiners stand out due to their reliability, performance, and adaptability. Our products are recommended because they provide a seamless solution for both indoor and outdoor mobile communication networks. Whether enhancing in-building coverage or expanding network capacity, SPINNER’s Sameband Combiners offer a reliable backbone for efficient signal sharing.

A double diplexer is a device that mechanically combines two (single) diplexers, also known as double unit. A double diplexer separates or combines signals from two different frequency bands. The double diplexer allows these signals to share a common antenna while maintaining isolation between them.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

The Double sameband multiplexer 1800 MHz 7-16 female DC port 1 to 3, 2 to 3 enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 100 W (per port) with maximum passive intermodulation (IM3) of -150 dBc (RX band).

The protection class is IP 65.

The port path designation regarding main line and probe is as follows: Port 1, 2, 4, 5: input, Port 3, 6: output

It supports the use of the following frequency bands : 1800

The 7-16 connector has become the most widely used coaxial connection system for mobile communication systems, due to its excellent mechanical and electrical properties. In order to achieve the industry leading intermodulation performance SPINNER applies silver-plating on all inner and outer conductor parts of the standard connector. As a supporting measure, we use exclusively non-magnetic materials, and we have minimized the number of RF contact points. The connection is especially suited for transmitting medium or high power indoors and outdoors.

RF characteristics

Number of interfaces:
6
Interface type:
7-16 female (50 Ω) per IEC 61169-4
Port / path designation:
Port 1, 2, 4, 5: input
Port 3, 6: output
Interface direction:
straight
Version:
double
Input : output ratio:
4 : 2
Combiner type:
Sameband combiners
Number of cavities:
4
Standard:
Mobile communication
Frequency range:
1710 to 1785 MHz (UL)
1805 to 1880 MHz (DL)
Frequency band:
1800
Bandwith:
10 to 30 MHz
Average power rating:
100 W (per port)
VSWR, max.:
1.25
Insertion loss max.:
1.4 dB
Stopband rejection:
Pass band = Band gap: ≥ 40 dB
Pass band = 2 x Band gap: ≥ 30 dB
2 x Pass band = Band gap: ≥ 55 dB
Passive intermodulation (IM3), max.:
-150 dBc (RX band)
Passive intermod. (IM3), typ.:
-160dBc (RX band)
DC-Bypass:
Port 1 ↔ Port 3
Port 2 ↔ Port 3
max. 1 A per input max. 60 V DC
AISG Standard, 2.0, § 6.4

Mechanical characteristics

Colour:
grey
Degree of protection:
IP 65
Weight, approx.:
13.0 kg
Length:
255.0 mm
Width:
398.0 mm
Height:
106.0 mm
Dimensions remark:
dimensions without mounting kit

Environmental conditions

Environmental conditions:
ETSI EN 300019-1-1 Class 1.2
ETSI EN 300019-1-2 Class 2.3
ETSI EN 300019-1-3 Class 4.1E
Operating temperature:
-5 to +65 °C

Scope of delivery & accessories

Mounting accessoires:
part of delivery

Further remarks

Customs tariff number:
85176200

Downloads

570611-DS.pdf

Product data sheet – 570614 – 570611-DS.pdf

570614-MS.vex

Model – 570614 – iBwave VEX file – 570614-MS.vex