MIMO 2-port thin HH-Pol omni in-building antenna 380-4000 MHz 5 dBi 360° 4.3-10 female

A77693
Compare

SPINNER in-building antennas offer very good electrical properties

The two main requirements for in-building antennas are: as inconspicuous as possible for maximum mobile network coverage in e.g. shopping centers, hospitals, trade fairs, airports, hotels, schools and universities, office buildings, underground car parks and other interiors. All SPINNER in-building antennas have 4.3-10 connectors and offer very good electrical properties over their respective specified frequency ranges starting from 380 MHz (Tetra) to 6000 MHz (WLAN).

Balanced, cost-effective and future-proof antenna portfolio

The MIMO 2-port HH-pol omni in-building antenna 380-4000 MHz 5 dBi 360° 4.3-10 female (IM -150 dBc) integrates perfectly into the existing DAS (Distributed Antenna System) portfolio, considering broadband technologies and cost-effectiveness. With technically diverse omni- and panel designs, which are suitable for either ceiling or wall mounting, SPINNER offers its customers a balanced, cost-effective and future-proof antenna portfolio.

Excellent mobile communication quality

The very flat, round Radom design of this 2-port (Multiple-In Multiple-Out) omni antenna meets one of the two essential requirements, namely, to keep the visual influence as low as possible, extraordinarily well. In addition, the resulting 360° omni-radiation diagrams offer a good price-performance ratio. This ensures excellent mobile communication quality in the frequency range from 380 to 4000 MHz in distributed antenna systems (DAS) indoors. The simple and fast ceiling mounting of the MIMO 2-port HH-pol omni in-building antenna 380-4000 MHz 5 dBi 360° 4.3-10 female is carried out by means of a central attachment via a single overlay nut. The use of the IM-stable 4.3-10 connector system ensures the best possible passive intermodulation (PIM) of the product and thus also for the entire in-building distribution system. The installation of Thin antennas is not recommended for metal ceilings. As a possible workaround SPINNER is offering an optional Absorbing Accessory.

RF characteristics

Number of interfaces:
2
Interface type:
4.3-10 female (50 Ω) per IEC 61169-55
Interface direction:
straight
Frequency range:
380 to 4000 MHz
Average power rating:
50 W
Antenna gain:
3.0 dBi @ 380 to 520 MHz (±1.0)
3.0 dBi @ 698 to 960 MHz (±1.0)
4.0 dBi @ 1710 to 2700 MHz (±1.0)
5.0 dBi @ 3300 to 4000 MHz (±1.0)
Polarization:
dual horizontal
Horizontal beamwidth:
85-250° @ 380 to 520 MHz
50-180° @ 698 to 960 MHz
50-180° @ 1710 to 2700 MHz
45-100° @ 3300 to 4000 MHz
Vertical beamwidth:
50-220° @ 380 to 520 MHz
35-100° @ 698 to 960 MHz
30-100° @ 1710 to 2700 MHz
30-80° @ 3300 to 4000 MHz
VSWR, max.:
2.5 @ 380 to 520 MHz
2.0 @ 698 to 960 MHz
1.8 @ 1710 to 2700 MHz
1.8 @ 3300 to 4000 MHz
Passive intermodulation (IM3), max.:
-150 dBc @ 698 to 960 MHz
-150 dBc @ 1710 to 2700 MHz
-150 dBc @ 3300 to 4000 MHz

Mechanical characteristics

Housing material / coating:
ABS
Colour:
white (RAL 9003)
Degree of protection:
IP 54
Degree of protection remark:
indoor
RoHS compliance:
compliant
Flammability rating:
UL 94-V1
Fire load:
6.25 kWh
Weight, approx.:
900.0 g

Environmental conditions

Operating temperature:
-55 to +60 °C
Relative humidity, max.:
95%

Further remarks

1):
The installation of thin antennas is not recommended for metal ceilings.
Customs tariff number:
85177100

Downloads

A77693-DS.pdf

Product data sheet – A77693 – A77693-DS.pdf

A77693-MS.vex

Model – A77693 – iBwave VEX file – A77693-MS.vex

10016369.pdf

Installation instructions – A77693 – 10016369.pdf