Precision short DC-67 GHz 1.85 mm female product photo Front View L
For a larger view click on the picture.

Precision short DC-67 GHz 1.85 mm female

533704R000
Not available This product is discontinued.

Precision shorts with highest quality for OSL and OSLT calibration

Nowadays, no development, production, testing, or quality control department that deals with RF signals on coaxial lines can afford to dispense with state-of-the-art high-precision equipment. It’s essential to use vector network analyzers (VNAs) in particular with high-precision connectors, terminations, and adapters.

Systematic errors can be fixed by calibrating the VNA. Different calibration standards with defined and known electrical characteristics are applied and compared to identify error coefficients. A technique called vector error correction is used to characterize error terms while applying known standards in order to remove errors from actual measurements and increase the accuracy of the results. A VNA can be calibrated in different ways depending on the required degree of accuracy. The methods used differ in both the number and the type of the calibration standards applied. The most commonly used calibration approaches are OSL (which stands for open-short-load) for single-port measurements and OSLT (for open-short-load-through) for multiple-port measurements. The order of the standards can vary in the designation; for example, the abbreviation SOLT is occasionally used synonymously.

A Precision short DC-67 GHz 1.85 mm female is provided for use in conjunction with OSLT or OSL calibration kits. The characteristic impedance is 50 Ω and provides highest precision over the frequency range of DC to 67 GHz. The scope of delivery includes: calibration certificate, calibration data, handling instructions.

This product has gold-plated connections and is based on the better quality classes of the IEEE, ICE standards with regard to lower tolerances. SPINNER also uses the term ‘precision’ here to emphasize the suitability for exceptionally high-precision measurements.

The 1.85mm connector was first proposed and introduced in 1986 and soon used on Vector Network Analysers. The 1.85 mm coaxial connector has an air-filled dielectric interface. 1.85 mm precision connectors are particularly suitable for use in radio-frequency test and measurement laboratories for frequencies up to approx. 70 GHz. They are designed with excellent characteristics and tight tolerances over the entire specified frequency range. They are an advancement of the coaxial 2.92-mm connector size and are known as Type-V connectors.

SPINNER RF measurement components meet highest standards

SPINNER has set new standards of accuracy with this product line, which includes a large family of coaxial test equipment with outstanding electrical and mechanical attributes for use in laboratory and production environments. For the production SPINNER applies extremely high standards regarding quality, engineering, materials and manufacturing e.g. DIN EN ISO 9001 - Quality Management, DIN EN ISO 14001 - Environmental Management and ISO 50001:2011 - Energy Management. This enables us to offer precision shorts with the best possible performance and lowest possible intermodulation (Low PIM).

RF characteristics

Number of interfaces:
1
Interface type:
1.85 mm female (50 Ω) per IEC 61169-32
Interface direction:
straight
Frequency range:
DC to 67 GHz
Phase deviation, max.:
2 ° @ DC to 26.5 GHz
3 ° @ 26.5 to 50 GHz
4 ° @ 50 to 67 GHz

Mechanical characteristics

Inner conductor material / surface coating:
CuBe age hardened / gold-plated
Outer conductor material / coating:
CuBe / gold-plated
Weight, approx.:
10.0 g
Marking:
laser engraving

Environmental conditions

Operating temperature:
+18 to +28 °C
Storage ambient temperature:
-40 to +70 °C
Storage relative humidity, max.:
95% (condensation not allowed)

Scope of delivery & accessories

Delivery scope:
calibration certificate, calibration data, handling instructions

Further remarks

Footnote:
The specifications for the short are given as allowed deviation from the nominal model as defined in the calibration data.
Calibration data in formats for the common VNAs are included in the delivery. It includes offset length and individual calibration coefficients to achieve the best possible performance.
Customs tariff number:
90309000

Downloads

533704-DS.pdf

Product data sheet – 533704R000 – 533704-DS.pdf

REACH_Test&Measurement_10123444-TD.pdf

Technical document – 533704R000 – REACH-Certificate for Test & Measurement Products – REACH_Test&Measurement_10123444-TD.pdf

RoHS_Test&Measurement_10121583-TD.pdf

Technical document – 533704R000 – RoHS-Certificate for Test & Measurement Products – RoHS_Test&Measurement_10121583-TD.pdf

M36081.pdf

Handling instructions – 533704R000 – M36081.pdf