Sliding load 2.4 mm male product photo Front View L
For a larger view click on the picture.

Sliding load 2.4 mm male

Not available This product is discontinued.

SPINNER loads offer outstanding electrical and mechanical properties

The modular SPINNER system for loads offers you great flexibility in the selection of your components. It allows you to configure power, frequency range and connectors according to your individual requirements. The advantages are obvious: cost savings through standardization and reliable technical quality.

The Sliding load 2.4 mm male is placed to the end of the signal path and thus guarantees the correct impedance termination. This reduces disturbing reflections and ensures the maximum performance and quality of the overall system. You can individually combine your attenuator and adapt it to the requirements of your local installation.

One application area of the SPINNER Sliding load 2.4 mm male is in measurement environments. It is characterized by its excellent IM properties and optimized electrical and mechanical tolerances.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

The load enables you to transmit high-frequency signals reliably and flawlessly with optimum protection of your sensitive equipment in a power range up to 0.2 W.

The load offers an interface 2.4 mm male.

SPINNER loads can be mounted vertically or horizontally. Only in a few cases a certain orientation is required for a product and therefore explicitly stated in our product data sheets.

The Sliding load 2.4 mm male is cooled passively by convection i.e. the heat dissipation via the cooling fins. Due to the flexible mounting options, optimum air circulation and thus cooling can be achieved.

The coaxial 2.4 mm connector is also known as the Type-Q connector. 2.4 mm coax connectors are particularly suitable for use in radio-frequency test and measurement laboratories for frequencies up to approx. 60 GHz. They are designed with excellent characteristics and tight tolerances over the entire specified frequency range.

RF characteristics

Number of interfaces:
Interface type:
2.4 mm male (50 Ω) per IEEE 287
Interface direction:
Frequency range:
4 to 50 GHz
Average power rating:
0.2 W
≥ 30 dB (after calibration)
Line accuracy:
≥ 44 dB
Return loss min.:
28 dB

Mechanical characteristics

Cooling type:
Inner conductor material / surface coating:
CuBe age hardened /gold-plated
Outer conductor material / coating:
copper-alloy / gold-plated
Weight, approx.:
100.0 g

Environmental conditions

Operating temperature:
+18 to +28 °C
Relative humidity, max.:
95% (at 40 °C, condensation not allowed)
Storage ambient temperature:
-40 to +70 °C

Scope of delivery & accessories

Delivery scope:
calibration certificate, protective cap, storage box

Further remarks

Customs tariff number:



Product data sheet – 741650R000 – 741650-DS.pdf


Product manual – 741650R000 – M36082.pdf