PCB launch connector R 620 (WR 15) 50-75 GHz product photo Front View L
For a larger view click on the picture.

PCB launch connector R 620 (WR 15) 50-75 GHz

533413
Compare

SPINNER adapters offer outstanding electrical and mechanical properties

Adapters are used to connect transmission lines with different interface sizes (so-called inter-type or between-lines adapter) or within one size but different interface genders (so-called within-type or in-line adapter).

SPINNER high frequency adapters are optimized for quality and performance and are designed for the lowest possible reflection factors. The outstanding electrical and mechanical properties, the simple installation and the high reliability make SPINNER high-frequency adapters one of the most efficient and cost-effective transition connectors on the market. Precision adaptors with RF quality grade 0 are available upon request.

The SPINNER PCB launch connector R 620 (WR 15) 50-75 GHz is characterized by its excellent low IM values and its longevity for test and measurement laboratories. A SPINNER precision adapter increases the lifetime of the connector of the analyzer considerably and thus saves money in the long term.

Outstanding RF characteristics, best possible passive intermodulation and VSWR

A PCB launch connector R 620 (WR 15) 50-75 GHz enables you to reliably transmit radio-frequency signals in the frequency range from 50 to 75 GHz.

The adaptor offers a transition from interface R 620 to interface R 620. The right-angle connector enables installation in confined spaces or special cable inlets.

For interconnection of ordinary waveguides there exists a plurality of waveguide flanges. They are defined in detail by the standards IEC 60154-2, EIA RS-166, EIA RS-271, MIL-DTL-3922, MOD UK DEF-5352and others. These standards also specify the designations for the constructive flange design. The designation lists the type, e.g. flat flange without sealing groove, flat flange with sealing groove or choke flange with sealing groove. Furthermore, the types, i.e. the specific flange geometry (as in EIA and IEC standards) or the part number of a specific flange made of a specific material (as in MIL and DEF standards) are indicated. Finally, the designation of the waveguide is given. For the specific details, please refer to the SPINNER technical document TD-00077. In addition to these standardized flange designs, there are other specific designs such as LIL (CERN), DESY or Merdinian. The compatibility is indicated in the data sheets.

MIL-Spec flanges have designations of the form UG-xxxx/U where the x's represent a variable-length catalogue number, not in itself containing any information about the flange.

RF characteristics

Number of interfaces:
1
Interface type:
R 620 per IEC 60153-2
Interface direction:
right angle
Waveguide interface:
precision split-block interface with anti-cocking rim
{compatible with} M3922/67-008 (UG-387/U-mod) type flanges
Frequency range:
50 to 75 GHz
Return loss:
15 dB

Mechanical characteristics

Installation type:
solderless
Inner conductor material / surface coating:
CuBe age hardened / gold-plated (PCB side)
Housing material / coating:
copper-alloy / gold-plated
Insulation material:
PEI

Environmental conditions

Operating temperature:
-40 to +85 °C

Scope of delivery & accessories

Delivery scope:
protective cap

Further remarks

Footnote:
panel fixture BN: B25702
Customs tariff number:
85366930

Downloads

533413-DS.pdf

Product data sheet – 533413 – 533413-DS.pdf

62424.pdf

PCB Layouts – 533413 – PCB-Layouts for SPINNER EasyLaunch Connectors – 62424.pdf

A74932-0E.pdf

PCB Layouts – 533413 – PCB-Layout coplanar RT/duroid 5880 LZ 0.254 mm – A74932-0E.pdf

A74933-0E.pdf

PCB Layouts – 533413 – PCB-Layout coplanar RT/duroid 5880 0.254 mm – A74933-0E.pdf

A74934-0E.pdf

PCB Layouts – 533413 – PCB-Layout microstrip RT/duroid 5880 0.254 mm – A74934-0E.pdf

A74935-0E.pdf

PCB Layouts – 533413 – PCB-Layout microstrip RT/duroid 5880 LZ 0.254 mm – A74935-0E.pdf

A94270-0E.pdf

PCB Layouts – 533413 – PCB-Layout microstrip RO3003 0.127 mm – A94270-0E.pdf

A94283-0E.pdf

PCB Layouts – 533413 – PCB-Layout microstrip RO3003 0.254 mm – A94283-0E.pdf

A96165-0E.pdf

PCB Layouts – 533413 – PCB-Layout coplanar RO3003 0.127 mm – A96165-0E.pdf

A96178-0E.pdf

PCB Layouts – 533413 – PCB-Layout coplanar RT/duroid 5870 0.254 mm – A96178-0E.pdf

A96360-0E.pdf

PCB Layouts – 533413 – PCB-Layout coplanar RT/duroid 5870 0.127 mm – A96360-0E.pdf

A99375-0E.pdf

PCB Layouts – 533413 – PCB-Layout coplanar RO3003 0.254 mm – A99375-0E.pdf

D04825-0E.pdf

Drawing – 533413 – Mechanical PCB-Design – D04825-0E.pdf

REACH_Test&Measurement_10123444-TD.pdf

Technical document – 533413 – REACH-Certificate for Test & Measurement Products – REACH_Test&Measurement_10123444-TD.pdf

RoHS_Test&Measurement_10121583-TD.pdf

Technical document – 533413 – RoHS-Certificate for Test & Measurement Products – RoHS_Test&Measurement_10121583-TD.pdf

M36272.pdf

Installation instructions – 533413 – M36272.pdf